Want this question answered?
No, you will ruin your car. A Chevy engine should not be put into a Porsche Boxter. I would recommend if you have the money, to buy an engine that is made by porsche that can go faster than your boxster.
On a 06 , 4.7, its located on the front, top, engine. remove hose, and a 22mm box should remove it.
Yes..you should be able to. You'll have to take off the starter, remove the front engine mount to be able to lift the engine slightly then remove the oil pan.
Remove air box, pulley is located just under attached to engine block. Should remove bolts take off belt, and replace pulley and belt.
Replace the Mazda engine.
remove the 2.4 liter engine cover (4 large bolts) disconnect any electrical conectors (these hook up to the coil packs) and lift it straight off the top of the engine remove the boots from the spark plugs (these should be replace) and the plugs should be fully visible
Should be 6 or 8, depending on the engine size.
Has a chain, it is designed for the life of the engine
Easy you call your trusty Shop and have them do it .If your asking this question is a sure thing that you should not touch it
Remove belt and tensioner complete should be able to be unbolted from engine (Left-hand thread)
follow the bottom radiator hose up to the engine and remove the two bolts an you should see it
Remove intake and exhaust manifolds, and then remove the head. This is a major repair that should only be attempted by someone who is competent.