0
16 inches center to center, 14 1/2 between them.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How much weight can you put on a floor joist?
it depen on the size of the joist
How much of a gap is left between each end of the floor joist and the web of the rim joist to prevent squeaking?
No gap is intentionaly left. Your squeaking will be between the subfloor and joists.
How much does a 16 2x12 pressure treated floor joist weigh?
It depends on its moister content.
How much space should be between the bottom of the door and the floor?
clearance between door and floor with forced air system
Can you drill a 2 hole through a 2 x 10 floor joist?
Stay as much towards the middle of the 2x10 as you can, but it is not going to weaken it that much.
How much space between deck floor boards?
If its wet I keep it tight, no space. With in weeks the wood will dry and shrink leaving the gap big enough.
What is the volume of a nightstand with base of 1.5ft by 2ft and a height of 3ft how much space does it need on the floor?
It will require a minimum of three square feet of floor space.
Roughly how much floor space does a three piece suite take up?
Making an estimate on floor space of a three piece suite depends directly on how large the rooms are in the suites. The floor space can be anywhere from 1,000 feet to 20,000 feet or larger.
How much floor space does a teepee have if the radius is 9 ft and and 10 ft high?
floor space has nothing to do with height. 81 x pi = 254.34 sq ft.
How much wall space between electrical outlets?
About 16 inches from the floor, that way it gives you about 5 inches to bend down into the box which is mounted at 12 inches.
How much space is needed between floors for installation of plumbing for a new bathroom?
You can do it with about 300 mm but you have to keep in mind what direction you are running the floor joists in. That way you will have to drill fewer holes in them.
How to build a platform over a sharply sloped floor?
How much slope and how long of a run? For short distance, up to 12 feet, and 12 inches of drop, you cut a 2x12 at the right slope and use them for the floor joist. For longer runs or greater slope, Use 2x6 level and use 2x4 legs under them.
