A shower head would use between 60 to 75 gallons for a 30 minute shower.
Depending on the showerhead, usually about 60-75 gallons.
depends on how much you want, like i have 700 gallons.
Can't say because this depends on the flow coming out of the shower head. If the flow is 1ltr per minute then in 10 minutes you will use 10 litres The average shower in the US flows at a rate of 7.9 liters per minute, or 2.1 gallons per minute. A ten minute shower would consume 79 liters or 21 gallons of water.
Most modern shower heads (U.S.) are restricted to 2.0 gallons a minute or less, so a ten minute shower would use approx. 20 gal.
About 1.25 gallons per minute.
It depends on how much water comes out of your shower head.
532 liters
An average flow rate cannot be determined as there are many different shower heads and each house in every country has different water pressure and not everyone may use full pressure when using a shower. But, approximately said that the average flow rate of shower water 2.5 gallons per minute at a water pressure of 80 pounds per square inch.
That is approximately 100 pints
A ten minute shower can use less water than a full bath. With a new 2.5 gallon-per-minute (low-flow) shower head, a 10-minute shower will use about 25 gallons of water, saving you five gallons of water over a typical bath. A new showerhead also will save energy — up to $145 each year on electricity — beating out both the bath and an old-fashioned showerhead. To avoid moisture problems, control humidity in your bathroom by running your ventilating fan during and 15 minutes after showers and baths.
Aim the shower into a bucket. Let it run for one minute. Measure how much water that has collected in the bucket. Now you have the flow per minute. Next, time yourself when you take a shower. Multiply the minutes spent showering with the flow rate to find the total amount of water used.
1 gallon
depends on your shower and shower head. If you are using a standard single shower head, in California the shower heads have regulators installed so they do not allow more than 2 gallons per minute, and some areas that is even reduced to 1.5 gallons per minute.First, you must find the gallons per minute (GPM) of the shower head. (You can request a "flow bag" from your local water agency/supplier) Follow the directions on the bag to measure the gallons per minute. . Most showers range from 2-4gpm. If you know your flow or gpm, then you can simply find how many gallons are used in a 10 minute shower. GPM x minutes. This would be a GREAT exercise for an elementary student since the math is relavent.what if you are 10 and you have to do this for school homework!For those of you who do not wish to measure your shower's gpm, the National Standard in the US is 2.5 gpm, and nearly every shower head available in stores complies with it (though some with a lower flow rate are available).ANS 2 - A 10 minute shower will use 25 -30 gallons of water.Most standard shower heads use 2.5 gallons of water per minute. That would mean in a 10 minute shower, you would use 25 gallons of water. Low-flow shower heads are available to cut down on water consumption and still provide a comfortable shower. There are models available that use 2.0 gallons per minute, and even some that use 1.5 gallons per minute. You can use an internet search to help you find an affordable low-flow shower head so you can do your part in conserving our natural resources.20 -24 gallons.