answersLogoWhite

0

3.14159 x the opening and then get the pressure / volume from the flushometer

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How much water would be saved if you fixed a slow toilet leak?

Many 'slow' water leaks will waste several gallons of water a day. Also, the floor around the toilet can be damaged if the leak is dripping onto the floor. Toilet repair kits are very cheap, and easy to install. Check at your local hardware store, Home Depot, or Lowe's.


How much water does a low flush toilet save a month?

If the toilet works each time on one flush, they use roughly half the water of a standard toilet. You would then use half as much a month on the toilet. They do not always flush completely on the first flush and the toilet is only a part of the water bill.


What can cause a commode not to flush?

Clogged toilet, mainline stoppage, not enough water in the tank or bowl, too much slack in flapper chain, bad flapper, broken handle...


How much water do you use when you flash a toilet?

Depending on the toilet, between 1 and 5 gallons.


Why Toilet water to high?

it smoked to much.. Its clogged


How to empty a toilet for removal?

To empty a toilet for removal, start by turning off the water supply valve located behind the toilet. Flush the toilet to remove as much water as possible. Use a plunger to push any remaining water down the drain. Next, disconnect the water supply line and unscrew the bolts securing the toilet to the floor. Carefully lift the toilet and empty any remaining water into a bucket. Dispose of the water properly and prepare the toilet for removal.


How much water usage does a toilet use?

It takes 1 bucket of water when we flush.


How much water can a toilet hold?

it is around 3 million litres


How much water does a running toilet waste?

Depends on how bad it is leaking


What to do when you have drunk too much coffee?

Lots of water and going to the toilet!


How much water is used for a conservation toilet flush?

3 liters


How much water can be saved if you conserve water?

—leaks in your toilet could waste up to 1000 gallons of water per month. You can find this out byputting food coloring into your toilet tank. If it seeps into the toilet bowl without flushing, you have a leak.—Also, you can save water bysetting a kitchen timer when you water your garden to remind you when to stop. A running hose can use up to 10 gallons a minute.—Lastly, when shopping for a new washing machine, compare water and energy usage among Energy Star models. Some of these can save up to 20 gallons per load, and energy too.