this will more than likely hit you for $150 to $200
$150-$200
3.5 inch from factory
there should be screws and nuts on the inside of the exhaust connecting it to the body, if not then it is an exhaust that needs a sprecial tool, is it a factory exhaust or not? =]
It does not have a cabin filter from the factory.
Follow the wiring harness from your blinker. Disconnect the factory harness from the relay. Replace with the new relay.
Losen the exhaust cross over and take off temp sensor
O2 sensors measure the amount of O2 in the exhaust so they are usually right after the exhaust manifold(s). I do not know Nissans but usually they will screw out. HTH
It varies.. At a dealership $900 - 1200 Non-dealership: I have seen it quoted for $750
No different exhaust lengths and bends that's like saying can a limo exhaust fit on a pinto
The exhaust manifolds on a 2000 Xterra are bolted onto the side of the engine heads. The manifold carries the engine fumes to the exhaust pipes.
The 2000 Dodge Ram oxygen sensors are screwed into the exhaust on the passenger side. To remove you unplug the connector and turn counter clockwise with a wrench. Reverse to install.
The only way to fix the dimmer switch is to replace it I have tried cleaning it lubercating it. nothing will fix it for good .so i had to replace it. It is a factory item.