It depends on the model of BMW you have. I have a 1997 528I and a non BMW repair shop quoted me 1000 euro or about 1400 dollars. This is in Germany were it is easier to get parts and cheaper. i would say on average in the us you should expect to pay about 1000 to 1400 dollars if you have a in-line 6 BMW. The labor is going to be the most expensive thing because it is about a 10 hour job. I hope this will help you out.
Average cost to replace a head gasket is $1000
I was just told that to replace mine in 1998 V70 would $4000K; which sems hideous and is why I'm checking the internet! That sounds like the cost to replace the Cylinder Head as well. A head gasket should cost about $1500 to replace.
about 1500 dollars
Bit of a tricky one ... It all depends on the condition of the cylinder head. If the cylinder head is warped then replacing the head gasket won't solve your problem. A warped cylinder head can be skimmed (if not too badly warped). If the cylinder head is badly warped then it would be much easier to replace the head than fit another engine.
more than the miserable car is worth
Yes
What is the cost to replace the head gasket on a Mazda MPV?
remove head and replace gasket :)
If it has a 5.3 engine, first have the cylinder heads pressure tested. Heads with a casting # of 706 like to crack in the number 1 head bolt hole. If this happens, replace head.
The cylinder head and other compnents need to be removed in order to replace the head gasket. As long as the cylinder head is off, it is a good idea to take it to an automotive machine shop for re-surfacing and a valve job before replacing it. For specific instructions on head gasket replacement and cylinder head removal, you can check out a Chilton or Hayne's Repair Manual for your vehicle at your local public library. Or, if you would like to purchase one for yourself, visit your local automotive parts house (AutoZone, etc,). Cost is $11-$14.
How does it cost to replace a head gasket for a 2000 Cadillac escalade
Begin by removing the cylinder head from your Chevrolet S 10 four-cylinder engine. Remove the head gasket and clean the surface. Put the new head gasket on and return the cylinder head to its original position.