Craig Rivet is 36 years old (birthdate: September 13, 1974).
Craig Rivet was born on September 13, 1974.
Craig Rivet was born on September 13, 1974.
If it is a rivet, then you must drill the old rivet out.
I assume the rivet you are asking about is a "tinners" rivet and not a more common "blind" rivet (commonly known as a "pop" rivet). If this the case the tool you want is called a "rivet set".
A rivet set is a tool used to seat the rivet while drawing the material to be joined together to eliminate any voids or spaces between the head of the rivet and the materials to be joined. Some rivet sets also have an indentation to assist in both initially deforming the rivet to "set it" and to assist in the final shaping, though in days of old the tool that was used for the final shape of a rivet was also sometimes referred to as a snap. But in another time a snap was what a round head rivet was called. This all, of course, was just to add a bit of generational confusion.
The rivet holding the old ball joint in place must first be drilled out. Use a punch and hammer to put a divit in the top of the rivet, drill a small hole then a larger hole through the rivet. Use a hammer and chisel to cut off the head of the rivet and then hammer out the rivet. The new ball joints are installed with small bolts.
upset -------------------------------------------------------------------------------- Upsetting the rivet is to compress the rivet during the installation process. That can be done with a rivet gun to "hammer" the rivet against a bucking bar, or to use a rivet squeezer to compress the rivet.
Craig Biggio is 52 years old (birthdate: December 14, 1965).
a rivet gun is a gun
A DD rivet is recognised by 2 dashes on the head of the rivet
Craig Wayans is 41 years old (born March 27,1976).
As of the 2014 MLB season, Craig Gentry is 30 years old.