Want this question answered?
processing is nothing
oxygen sensor
analog sensor
A: DISTURB signal when the magnetics are in proximity
you can use an impedence converter or a voltage follower
In robotics and technology, a tactile sensor is a device designed to send a signal when it is touched (or when it touches something). A recent and common example of a tactile sensor is the touch screen on many smart phones, cash registers, and tablet PCs.
In robotics and technology, a tactile sensor is a device designed to send a signal when it is touched (or when it touches something). A recent and common example of a tactile sensor is the touch screen on many smart phones, cash registers, and tablet PCs.
processing is nothing
The computer decides to run the fans off of the signal from the engine coolant temp (ect) sensor and the air conditioning pressure. The ect is the two wire sensor nearest to the upper rad hose on the engine.
In electronics, signal conditioning means manipulating an analogue signal in such a way that it meets the requirements of the next stage for further processing. Most common use is in analog-to-digital converters.In control engineering applications, it is common to have a sensing stage (which consists of a sensor), a signal conditioning stage (where usually amplification of the signal is done) and a processing stage (normally carried out by an ADC and a micro-controller). Operational amplifiers (op-amps) are commonly employed to carry out the amplification of the signal in the signal conditioning stage.So, a signal conditioning circuit includes a logarithmic signal compression circuit for compressing wide dynamic range input signals to a dynamic range which is a predetermined portion of the dynamic range of an output utilization apparatus. There is provided, additionally, means for detecting the presence of the high level signals and superimposing a signal representative of the high level signals on the compressed signals to provide a combined output signal which, while compressed to the range of the output utilization apparatus, contains definable low level and high level signals from a wide dynamic range input signal.
no most likely not. It could be a faulty ground wire
Camshaft postion sensor signal intermittent.Camshaft postion sensor signal intermittent.
22- Coolant sensor signal out of range22- Coolant sensor signal out of range
5 volt supply, sensor ground and signal voltage.5 volt supply, sensor ground and signal voltage.
oxygen sensor
analog sensor
A gear inside the transmission turns a gear on the speed sensor. This creats a wave signal which is sent to the speedometer. The speedometer translates the signal and moves the needle in relation to the sent signal from the sensor. The signal is also sent to the ecu.