It's up there. If you have seepage at the head gasket, you need to replace it.
if it is busted near a water jacket then serious. if between cylinders or on the edge of a cylinder, then you just lose power.
A head gasket joins that cylinder head with the cylinder block. It separated the oil and the coolant passages. If the two mix, the head gasket will "blow" soon.
Begin by removing the cylinder head from your Chevrolet S 10 four-cylinder engine. Remove the head gasket and clean the surface. Put the new head gasket on and return the cylinder head to its original position.
Gasket between engine block and cylinder head
remove head and replace gasket :)
You possibly have a leak in the cylinder head gasket.You possibly have a leak in the head gasket.
A common cause of problems in cylinder head gaskets is leaks in the gasket. When a leak forms, the gasket must be replaced.
The head gasket is the gasket that fits between the cylinder head and the engine block.
gasket, head
Valve cover gasket holds oil from the valves from leaking off the top of the head . Head gasket is lower and holds cylinder pressure between the cylinder head and the engine block.
blown head gasket,cylinder head not torqued to specs. cracked/warped cylinder head.those are some causes.
You will need to remove the cylinder head from your Chevy Lumina engine. Remove the head gasket and clean the surface. Put the new head gasket on and return the cylinder had to its original position.