start by focusing with the lowest lens to make sure the slide is right and you can see the specimen them proceed to the next lens power and focus again just to make the view clear then proceed to the highest and focus one more time
FOCUS
First put the specimen into focus using a low power lens, then switch to a higher power lens if needed.
Which of the following is a correct procedure for the operation of a microscope? First, put the specimen into focus using a low power lens, then switch to a lower power lens if needed.Remove and add slides while the high power lens is selected.First, put the specimen into focus using a low power lens, then switch to a higher power lens if needed.Use the fine focus knob with the low power lens and use the coarse focus knob with the high power lens
Microscope Cross Word (Biology homework) - Highpowerobjective Microscope Cross Word (Biology homework) - Highpowerobjective Microscope Cross Word (Biology homework) - Highpowerobjective LOL IM WORKING ON THIS CROSSWORD TOO!!!! YAY Im in 7th grade btw
A microscope is a scientific instrument with one or more lenses that enhances the view of smaller objects, for example, microorganisms (bacteria) and microsopic materials, which are too small to be seen with the naked eye. The eyepiece lens and objective lenses able to zoom in and out to enlarge and observe the specimens more clearly, with the objective lenses having a much better zoom-in ability. The eyepiece lens is at the top where you look into to observe the specimen. There are usually 3 or 4 objective lenses on a microscope held by a revolving nosepiece/turret, consisting of different times of zoom-in, e.g. 40x, 100x, 400x.... Also, there is a fine focus knob and a coarse focus knob. The coarse focus is for moving the objective lenses nearer/further away from the specimen while the fine focus is for fine-tuning the focus (usually when it is unclear). Use the coarse focus before the fine focus unless there is no need to zoom in on the specimen. Finally, an illuminator might shine a light on the specimen so that you can see it more easily.
First use the coarse focus followed by the fine focus.
First use the coarse focus followed by the fine focus.
FOCUS
To focus the image of the specimen
to focus on the specimen
The final focus? Its used for final focusing of the specimen.
true
focus
to easily adjust when you look the specimen and to focusing
coarse sdjustment knob
using the course adjustment to focus the specimen under high power
It may be necessary to continually focus a microscope so as to get accurate results about a specimen. This will give you enough time to study any specimen.