Want this question answered?
How do you change a shock on a Peugeot 106 gti
Typical location on a shadow. From the front of the car, drivers side. first relay is an auto shutdown relay. Second relay is A/C clutch cutout relay. third relay from the front is the fan relay. On the shock tower facing the relays from the front of the vehicle is: right side relay is the starter and left to it is the anti lock brake relay.
badly worn shock absorbers get them changed quick
It is the middle relay (of the 3) on the drivers side fender well (In front of the shock tower)
very carefully.
Remove 3 bolts, remove shock, insert shock, compress shock, replace bolts
Shock Front was created on 1999-11-22.
Follow the + battery cable--should be connected to relay
upper rear right corner of the radiator and/or attached to the radiator hose. If it has an electric cooling fan in front of the radiator, the relay is a black rectangular 4 pin located on the bracket next to the left shock tower. If you are asking about a relay for the blower fan in the car, there is no relay
It will be easier if you pull off the front tires then you have the shock bolts at your reach. It took me 30 min for both front shocks.
The owner's manual shows - "to raise a front wheel , place the jack directly under the shock absorber so that it contacts the bottom of the shock "
The cost of labor to change the front shocks on a 1997 Chevy S-10 pickup varies greatly by the place where service is performed. As of 2014 this ranges from 41.50 per shock to 80.00 per shock.