0
What else can I help you with?
What is the design factor of strength 10000 pounds and working load of 2000?
The design factor, also known as the factor of safety, is calculated by dividing the ultimate strength by the working load. In this case, the design factor is 10,000 pounds (design strength) divided by 2,000 pounds (working load), which equals 5. This means the system is designed to withstand five times the working load, providing a safety margin in case of unexpected loads or conditions.
How calculate wire rope load capacity?
Wire rope load capacity can be calculated by considering factors such as the breaking strength of the wire rope, the design factor for the specific application, and any additional safety factors required. The formula typically used is: Load capacity = (Wire rope breaking strength / Design factor) - Weight of the load. It is crucial to consult industry standards and guidelines when determining load capacity to ensure safety and reliability.
What is calculated load?
A calculated load in electrical terminology is the sum of all of the loads that are connected to a system. To size a service distribution for a home all of the connected loads have to be calculated in. Some loads can be derated as per the electrical code. When the total amperage is calculated from the sum of all of the loads, the wire size and distribution can be sized to handle the calculated load.
What is the no load current of a 90kw motor operating 440V 60Hz?
The no-load current of a motor, such as a 90 kW motor operating at 440V and 60Hz, can vary based on its design and efficiency. Typically, the no-load current for such motors ranges from 10% to 30% of the full-load current. To estimate the no-load current, you can use the formula: No-load current ≈ Full load current × (no-load current percentage). The full-load current can be calculated using the formula: Full Load Current (A) = Power (W) / (Voltage (V) × √3 × Power Factor).
Why there should be a gap between the load applied to the structure and the factored load on the design?
to minimize over load
What is proof load and how it is calculated?
proof load testing is to try to find the % at which the equipment can lift over the safety working load.
What is working stress method?
it is a method of design in rcc structures, in which stresses of materials is calculated by using working load and compared with allowable stress by considering a linear stress strain relation ship.
What is the maximum Test Load on Pile have been carried out?
2.5 times of design load
What is the static load on a hydro tower?
The static load on a hydro tower refers to the weight of the structure itself, including the tower, crossarms, insulators, and conductors, when it is at rest. This load is carefully calculated during the design phase to ensure that the tower can support its own weight along with any additional loads it may experience during its lifetime.
What is live load in bridge design?
Trucks, etc.
What is the calculated load for an electric range rated at 16 kw?
a: there is no calculated load for the range. This 16 kw is the maximum that this particular range can safely use any thing less is OK.
Function of no-load in transformer in a open-circuit?
To calculate the no load current from transformer & core loss is also calculated.
