Your car most probably has an automatic belt tensioner that keeps the belt tight and in proper spec. If the belt has too much play in it, the belt tensioner will need to be replaced.
Put the serpentine belt around the pulleys on your 2001 Chrysler LHS. Tighten the serpentine belt by pushing the tensioner pulley to the left. Tighten down the tensioner pulley and the serpentine belt will be tight.
You can tighten the serpentine belt on your 2005 Chrysler 300 by tightening the tensioner pulley. Push the tensioner pulley to the right until the serpentine belt is tight.
There is a spring loaded tensioner that is supposed to keep the serpentine tight. If it is loose, it needs to be replaced.
You don't. The tension on the belt is held tight by a spring loaded tensioner idler.
replace the spring loaded belt tensioner as it's the only thing that will keep the serpentine belt tight.
A serpentine belt has an idler pulley on is to keep it tight at all times. If your serpentine belt is loose, then something is worn out. Its possible the idler pulley is stuck in its bracket so it cannot move or the spring on it is worn out.
How do you tighten the serpentine belt on an oldsmobile ciera
No you can not, It is kept tight by a spring loaded belt tensioner with a smooth pulley on it. Probley needs a belt tensioner on it.
if belt needs tightening, u need a new belt serpentine belts use a tension pulley that automatically keeps belt tight until belt is worn out or stretched.
You don't tighten a serpentine belt. The tension is controlled by a tensioner. If it is loose, then the belt has stretched and needs replacing.
To re-install a belt tensioner for a 1987 Ford Taurus, tighten the bolt when the tensioner pulley is holding the serpentine belt tight. The belt tensioner sits in a slot and can be adjusted to hold the belt tight.
Most serpentine belt systems have a self adjusting tensioner.