Want this question answered?
there are five stages stage 1 - 20nm st 2-40nm st 3 tighten further 90 degres st 4 further 90 degres st 5 angle tighten further 90 degres that's what it says in my haynes manual fiat brava n-w reg 4-cylinder petrol engine
how remove cylinder head
You have to remove the cylinder head(s) to access the lifters.You have to remove the cylinder head(s) to access the lifters.
20nm 40nm 90degrees 90degrees
30nm 90degrees and then another 90degrees
Yes.
Remove the cylinder head from your VW engine. Remove the head gasket and clean the head gasket surface. Put the new head gasket on and return the cylinder head to its original position.
Start with undressing the cylinder head inlet and exhaust manifolds get a container for bolts and any other small stuff undo all of the cylinder head studs and lift off the cylinder head.
remove head and replace gasket :)
2 hours to remove it :)
Uno 1100 cylinder head? 30nm 90degrees then another 90 degrees
You will need to remove the cylinder head from your Chevy Lumina engine. Remove the head gasket and clean the surface. Put the new head gasket on and return the cylinder had to its original position.