0
If you are constructing an extension cord make sure that the cap ends go on the right end of the extension cable. Match the wire cable end when looking at it, to the proper pin configuration of the plug. A non locking plug will be a 6-30P or a locking plug will be a L6-30P. On a 6-30P plug (cap), black wire to the left blade, white wire to the Y terminal and the green wire to the G terminal. On a L6-30P plug, black wire to the X terminal, white wire to the Y terminal and the ground wire to the G terminal.
Looking at the end of the cable it should be matched to this configuration. If it doesn't, look at the other end of the cable. No wires should cross when connecting to the blades on the plug, if they do you have the wrong end of the extension cable and the polarity will be wrong when plugged into a receptacle.
Wiki User
∙ 8y ago
Wiki User
∙ 14y agoExtension cord construction
If you are constructing an extension cord make sure that the ends go on the right end of the cable. Match the wire end when looking at it, to the proper pin configuration of the plug. Looking at the plug from the blade side directly on you should see a larger blade (silver) on the right, smaller (brass) blade on the left and a U shaped ground blade on the bottom. The white wire connects under the right (silver) coloured screw, the black wire connects under the left (brass) coloured screw and the green wire under the green ground screw. Looking at the end of the cable it should be matched to this configuration. If it doesn't look at the other end of the cable. No wires should cross when connecting to the blades on the plug, if they do you have the wrong end of the cable.
<<>>
Black = hot
White = neutral
Green = ground
Wiki User
∙ 14y agoExtension cord construction
If you are constructing an extension cord make sure that the ends go on the right end of the cable. A 220 volt cord is constructed the same as a 110 volt cord. The extension cord cable has the same voltage insulation, rated at 300 volts or larger cable rated at 600 volts, for both working voltages of either 110 or 220 volts. Match the wire end when looking at it, to the proper pin configuration of the plug. Looking at the plug from the blade side directly on you should see two tandem blades (silver) screw on the left, and a (brass) screw on the right and a U shaped ground blade on the bottom. The white wire connects under the left (silver) coloured screw, the black wire connects under the right (brass) coloured screw and the green wire under the green ground screw. Looking at the end of the cable it should be matched to this configuration. If it doesn't look at the other end of the cable. No wires should cross when connecting to the blades on the plug, if they do you have the wrong end of the cable.
Wiki User
∙ 14y agoyes
Add your answer:
Earn +20 pts
Is the ribbed wire on a extension cord the black?
no
Is ribbed wire black or white?
The ribbed wire on a lamp cord is the neutral wire. On an extension cord there is no rib but the neutral wire is white in colour.
What is the best size wire for a welder extension cord?
25 percent larger wire for 50 feet.
What tools and materials used for assembling extension cord?
Materials would consist of extension cord cable, male and female cap ends. The tools would consist of a screwdriver that will fit the termination ends screw configuration and a pair of wire strippers or a knife to strip the extension cord wire.
Can a microwave be plugged into an extension cord?
Yes, as long as the extension cord is rated for the load. Most microwave ovens use 1000W or more, some less. A standard two wire extension cord would be unsafe. There are, however, extension cords which have the proper gauge of wire and the necessary 3-prong outlets which a microwave would need to operate safely.
How do I assemble a wire shelf?
In order to assemble a wire shelf, you are going to need the tools that are included in the tool kit when you purchase the wire shelfing rack you purhcase.
What is the extension wire used for on an outdoor gourmet Triton gas grill?
According to the grill guy at Academy, the extension wire is used as an alternate way to light the grill. Clip a match into the end of the extension wire, light the match, and then use the extension wire to light your grill without placing your hand too close to the burners. Makes sense, but I would suggest they rename this part "manual grill lighter extension wire."
Is the ribbed wire on a extension cord the black?
no
How to assemble wire organizer cubes?
Assemble wire organizer cubes by connecting the wire panels at the corners using connectors or clips provided. Start by aligning the panels in the desired configuration and secure them together, ensuring they are stable. Follow the manufacturer's instructions for the specific model of wire organizer cubes you have for proper assembly.
Is ribbed wire black or white?
The ribbed wire on a lamp cord is the neutral wire. On an extension cord there is no rib but the neutral wire is white in colour.
How do you get a spark plug socket out that came off the extension?
Wire coat hanger or push longer extension into it and pull out.
What is the best size wire for a welder extension cord?
25 percent larger wire for 50 feet.
How hard is it to assemble adjustable wire shelving?
Wire shelving is usually a simple task to install. The shelves should come with detailed instructions.
How do you re-wire an extension cord green white black?
You can rewire your extension cord by replacing the existing wire with green, black and white wires. In most situations it is safer and cheaper to buy a new extention cord.
What tools and materials used for assembling extension cord?
Materials would consist of extension cord cable, male and female cap ends. The tools would consist of a screwdriver that will fit the termination ends screw configuration and a pair of wire strippers or a knife to strip the extension cord wire.
Can a microwave be plugged into an extension cord?
Yes, as long as the extension cord is rated for the load. Most microwave ovens use 1000W or more, some less. A standard two wire extension cord would be unsafe. There are, however, extension cords which have the proper gauge of wire and the necessary 3-prong outlets which a microwave would need to operate safely.
What is the extension cord with 3 prong could be used for?
Depends on the size of the wire in the extension cord. The 3 prong is just the hot, neutral, and ground.
