For a detailed description you will need to purchase a Haynes Manual specific to your car.
Remove the wiring harness from the back of your 1994 Chevy Cheyenne wiper motor. Remove the traveling arm linkage. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
Check to see if you are getting power to the wiper motor. If you are it is likely the FUSE, but if that's already been checked it SHOULD either be, the wiper motor or the switch, I would guess the motor.
The 2004 Chevy Malibu windshield wiper relay switch can be found on the firewall in the engine compartment. The windshield wiper relay switch will be on the drivers side of the firewall.
in the front side of the wiper motor
Inside the wiper motor.
what is the labor cost to replace a wiper reservior bottle in a 2002 Chevy Malibu
If it is on the bottom of the wiper motor-just unclip and it twists out
The 2000 Chevrolet Malibu windshield wiper relay switch is located on the firewall in the engine compartment. The windshield wiper relay switch will be on the drivers side of the firewall.
need more info.
The 2003 Chevrolet Malibu takes 22" driver side and 19" passenger side replacement windshield wiper blades.
it is on the wiper motor unplug wires unscrew cover and it pops out gos back in just the same
You must first remove the wiper arms. then, remove the screws holding the black plastic grill under the wiper arms. This will expose the motor. You will then need to disconnect the wiper arm transmission linkage from the motor, the remove the three bolts holding the motor on. Install in reverse order.