Go to menu, select channel guide, scroll down the channel guide list, (you will go past the 100's) keep scrolling, you will see a selection of video inputs to choose from ex. Vid1, Vid2, FRNT etc. I hope this helps!
There is no way to change the input without a remote :(.
Depending upon the remote, our remotes have either a TV/Video, TV/Video/Input, or Input buttons. This button will cycle through the inputs on your TV when the remote is programmed to control the TV.
I have no idea how old this is but for people who come here in the future if you lose the remote nothing you do seems to change it to game mode. Just invest in a inexpensive vcr hook up the coax to your output to tv hook up w/e audio video cords you have to the back of the vcr and enjoy not having to buy a stupid remote for a cheaply made tv with no input button ffs
Try changing the channel to where channel 1 would be. Some tvs have the video inputs there.
You usually select the video channel input via the remote control or the menu button on the front of the set.
Access the input menu on the monitor and select the video input you want. Some monitors have a video select switch on the outside of the case.
There should be an "input" button with the other manual controls on your TV's front, side, etc.
It's not possible to access the input selection area without a physical remote as the setting is not available from within the MENU setup. There was no love with the dtv remote, even though it would do all the other controls. I bought an rca universal remote for $6.93 at Lowes. Model #: RCU703SPR The ilo codes didn't give me what I needed from the input button, so I used the Emerson ones and one of those worked. After you are able to power on/off the next thing you check is the input button, if it does not work, try another code... Good luck!
Input devices for PS3 include but are not limited to microphone, keyboard, Bluetooth, Remote wired/wireless, camera etc. Any device that can "input" any kind of data such as text, video, audio and so on is known as input.
Connect Audio out on the box to Audio In on the TV set. Make the same connection for the VIDEO. Use Input 1 on the TV then select Video 1 on the remote, Use the INPUT button.
Check the remote CLOSELY, I have found a button stuck down on the remote. put in new batteries, then push the INPUT button a few times.
Depending on which DISH remote you have, the remote has a TV/Video/Input or Input button (newer remotes) below the SAT or TV buttons at the top of the remote. When you press this button, while in TV mode, it will cycle through the different inputs on your TV. If you are still not able to find a picture, you can unplug the receiver from the electrical outlet for 10 seconds and plug back in.