Want this question answered?
That would be the motherboard. The processor is plugged into the motherboard, and the motherboard is mounted in the case.
Computer case.
To Prevent components on the back of the motherboard from touching the case.
Sound cart to CD/DVD drive. In case of an onboard sound of your motherboard, just connect the CD drive via IDE to your motherboard.
A computer system unit is the case with the motherboard and all the ports. The box you unplug and walk around with. The CPU is the Central Processing Unit, this is a chip on the motherboard that does all the processing.People erroneously refer to system unit as CPU.
assures that the mother board fits in the case. Holes in case align with ports coming off the motherboard. The holes holes in the motherboard align with the holes in the case for anchoring the board to the case.
Another term for motherboard is mainboard.
A round plastic or metal peg that is used to separate the motherboard from the case, so that components on the back of the motherboard do not touch the case.
your system's BIOS is stored on an unremovable chip on your computer's motherboard. your system's BIOS is stored on an unremovable chip on your computer's motherboard. your system's BIOS is stored on an unremovable chip on your computer's motherboard. your system's BIOS is stored on an unremovable chip on your computer's motherboard. your system's BIOS is stored on an unremovable chip on your computer's motherboard. your system's BIOS is stored on an unremovable chip on your computer's motherboard. it is permanently stored on one or two ROM ICs installed on the system board
Usually, when you buy a computer case it comes with standoffs which get screwed on to the case (there's usually at least 6 and as many as 10) and then the motherboard sits on those standoffs instead of on to the case itself. The motherboard standoffs serve the purpose of avoiding direct contact between the motherboard and the case itself so as to avoid a possible electrical discharge which would in turn damage the motherboard. There are holes on the case where the standoffs should be placed.
The BIOS on the motherboard.
Which action is recommended to prevent the motherboard from contacting the metal base of the case? Ensure that the non-conductive side of the case is beneath the motherboard. Use standoffs to keep the motherboard above the metal base. Place a non-conductive barrier between the motherboard and the metal base. Use a self-adhesive non-conductive membrane on the underside of the motherboard. Which action is recommended to prevent the motherboard from contacting the metal base of the case? Ensure that the non-conductive side of the case is beneath the motherboard. Use standoffs to keep the motherboard above the metal base. Place a non-conductive barrier between the motherboard and the metal base. Use a self-adhesive non-conductive membrane on the underside of the motherboard.