Use the continuity test facility , I have information on my website and links for testing and inspection http://www.rbgrant.co.uk
Losses are mainly due to electrical resistance.
Because they have low electrical resistance, good enough mechanical properties and aren't too expensive.
The resistance of the cables that conduct the electric current away from the substations causes the cables to dissipate some of the electrical energy in the form of heat.
A megger is an electrical instrument that is used to measure the resistance of insulation by applying a DC voltage to the conductor. One lead is connected to the conductor and the other lead is connected to ground. Safe insulation reading to ground should be above 2,000,000 ohms or 2 megs.
How do you remove electrical cables without damaging existing cables?"
Because it would affect the Cross sectional area of the conductor therefore altering the resistance.
aluminium is used for making electrical cables as the metal do not melt easily
because of heat cables expand
Continuity of electrical cables must, because it is the process of inspection to found any discontinuity in the cable
we can use the electromagnetic waves to transmit the electrical powers without the cables. But it is very difficult.
By cables.
an exposed conduit used for carrying electrical wires/cables