answersLogoWhite

0


Best Answer

go to napa auto parts and ask them for a door panels retainer removal tool. Yeah that thing helps a lot. After you do that it's just a bunch of screws and pull-out clips. Just 'Pull it out'. Don't loose those little u-shaped window handle clips! You have to buy a bunch at an auto store just like I did!

User Avatar

Wiki User

โˆ™ 2006-05-05 05:08:40
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Add your answer:

Earn +20 pts
Q: How to remove a cavalier door panel?
Write your answer...
Submit
Related questions

How do you remove the door panel on a 1994 Chevrolet Cavalier Z24?

The door panel in a 1994 Chevrolet Cavalier Z24, can be removed by first removing the lens covers from any lights in the door. Then, remove the light sockets themselves with a screwdriver. Using a flat screwdriver, gently pop the clips on all sides of the door panel and remove it.


How to you remove and replace a door lock for a 2003 Cavalier?

It has a retainer on the inside of the door. Take the door panel off.


How do you remove the driver and passenger door panels in a 2002 Chevrolet Cavalier Z24 to access the speakers?

are they wind up windows or power windows? for power windows remove the door panel screws and pull. for wind up windows remove small metal snap rings behind the window handle. remove them and then remove all door panel screws and pull door panel off.


How do you remove the door panel?

how do i remove the rear door panel of a 190 e?


How do you remove a 1959 Chevy door panel?

Remove the screws in the door panel.


Where can a diagram be found on how to remove the interior door panel of a 1999 Chevy Cavalier?

In a repair manual - I have Chilton's but Haye's will also do.


How do you remove the door panels in your 1999 Z24 Cavalier?

To remove the door panel on a cavalier there are four screws on the under side and the back of the bottem lip. Remove those screws then there are 2 screw in the door handle. Remove those. remove the triangle piece of plastic where the mirror controls are then give it a little tug and the door panel should pop loose then lift up and walk away with it. If you have crank windows then you have to remove the crank lever and if you have electric locks the you have a clip you have to un do that powers the switch.


How do you remove the door panel on a rear door of?

how do i remove a door panel of a skoda octavis while door is stuck looked


How do you remove the driver door panel on a 2002 Chevy Malibu?

Using a screw driver, remove the screws and the clips in the panel of the door and remove the panel gently. Remove any wiring connectors between the panel and the door, then remove the panel the rest of the way.


How do you install speakers into a 99 z24 Chevy cavalier?

i got the same car. remove the door panel there will be two screws in the inside door handle and like 6 or 5 aound the outside edge of the door panel remove all these and then pull and pop the tabs loose all around. and pull the whole panel upwards off the door


How do you remove the door panel on a 1999 Cougar?

how to remove the door panel on a 1992 mercury cougar


How do you remove peugoet 407 interior door panel?

remove the door panel on peugoet 407


How do you remove passenger door panel on Xterra?

To remove a door panel a person must use a screw driver, remove the screws and the clips that are holding the door panel to the door frame. Gently pull the panel away from the frame, remove any wire connectors and the panel will come off.


How do you remove the door panel of a 2001 Chrysler sebring?

how do you remove the door panel on a 2001 dodge stratus?--2 door


How to remove door panel from Impala?

First you have to unscrew the door handle bezels and remove them from the door panel. Then unbolt the door pull from the door of the car. Next you have to pry the door panel tabs off of the door.


How do you remove a 2001 Lincoln town car door panel?

Unscrew the door lock.Remove the door pull.Take out any remaining screws on the door panel.Remove the master power switch.Pull the panel from the door.


How do you remove the door panel on a 2000 Plymouth Voyager?

Go to this website. It will show how to remove the door panel.


How do you remove the door panel for a 2003 Montero Sport?

how do you remove the door panel for a 2003 mitisbushi montero


How do you remove a Nissan Almera s door panel?

How do you remove a Nissan Almera s door panel?


How do you take the door panel off on a 2004 Chevy Cavalier?

The interior front door panel of a 4-door is attached to the door with two screws in the arm rest, three at the bottom of the panel, one at the edge nearest the door latch, and one in a separate plastic panel near the outside mirror. Remove the screws using a Phillips screw driver, then gently pull on the panel to remove it. After loosening the panel there is an electrical connector to unplug (with electric door locks) before the panel can be completely removed from the door. Removing rear door panels or the panels on 2-door Cavaliers should be similar.


How to remove the door panel on 1999 Buick LeSabre?

Using a screw driver, remove the screws and the clips that are in the door panel. Gently pull the door panel away from the frame, remove any wire connectors and the door panel should be free.


How do you take off the door panel in a 2000 Kia Sephia?

Using a screw driver, remove the screws and remove the clips from the door panel. Remove the panel slowly, remove any wire connections, and pull the panel off the door frame.


How do you remove the door lock trim panel on 1999 suburban?

remove the inner door panel, you can access the bolts from the inside of the door.


How do you remove a passenger door panel on a 1997 Ford Ranger?

remove the window handle, remove screws from armrest, remove the inner door handle and the screw on the lower rear of the door panel, lift the panel upwards to remove from the slots along the bottom of the door.


How do you replace the drivers mirror on a 1999 Chevrolet Cavalier?

Remove the 1999 Chevrolet Cavalier inside door panel. The mayor assembly will be visible. Remove the retaining bolts and wiring harness. Reverse the process to install the new mirror.