Want this question answered?
First, remove the neg battery cable. Then take the wires off of th starter and then the bolts holding it on and work it out.
The shifter knob on a 1995 Chevy Cavalier is thread on. To remove it just spin the knob counter clockwise until it comes off.
No, I have a 1998 Cavalier and it does not have a cabin filter. You can take off the 3 bolts off the heater blower and remove any leaves or debris.
Remove the wiring harness or the fan motor belt, depending on the year of your Chevy Cavalier. Remove the fan motor retaining bolts. The fan motor will come off.
You have to remove the bracket assembly (that holds the grille) from the header panel.
It is directly behind the radiator and to the left, you must remove the hose and t=you will see the housing, it is held on by 2 8MM bolts. Remove the two bolts and you can take off the thermostat coer, and see the thermostat.
First you want to remove the bumper cover, it isnt nesecary but it saves a couple hours of time. Second Remove headlights, if you havent while taking the bumper cover off. Third there is a couple bolts holding in the header panel, remove those and then there (may) be a wire clipped into the back of the header panel, if so carefully remove it. Fourth repeat all previous steps in reverse for installation.
The 2000 Chevy Cavalier cooling fan shroud is held in place with 10 retaining bolts. Remove the retaining bolts and the cooling fan shroud will come off.
It has a retainer on the inside of the door. Take the door panel off.
If your looking for an inertia fuel switch, it doesn't have one.
First you must remove the lug nuts from around the wheel, and then you must take the wheel off of the braking system
the fuel pump is in the gas tank, so you need to remove all the gas and take the tank off.