pull hvac knobs off,pop a/c vents out,remove 2 screws,pop off trim plate,remove radio screws
Remove the decorative stereo cover. Remove the stereo retaining screws. Pull the stereo out. Remove the wiring harness and the antenna cable.
remove 2003 Saturn vue radio
use your hands Xd
Complete 420A/Neon MegaSquirt EMS Kit, will replace your Neon's computer and remove the governor
I don't know a lot about cars, but I just bought a 97 neon. Just pop the face plate off that surrounds the stereo, unscrew the bolts holding it in place, pull it out and disconnect the 3 wires attaching it. -Cody-
To remove the stereo in a 2003 Suzuki Grand Vitara XL7, start by disconnecting the negative battery terminal to ensure safety. Use a flathead screwdriver to carefully pry off the trim panel surrounding the stereo, then remove any screws securing the stereo in place. Once the screws are removed, slide the stereo out of the dashboard and disconnect the wiring harness and antenna cable from the back. Finally, install the new stereo by reversing these steps.
you must first detatch all wires
Remove the retaining cover from your stereo. Remove the stereo retaining bolts. Slide the stereo out and remove the wiring harness. Reverse the process to install your new stereo.
To remove the stereo from a 2003 Mazda Tribute, first disconnect the battery to ensure safety. Then, use a flathead screwdriver to carefully pry off the trim panel surrounding the stereo. Once the trim is removed, unscrew the mounting screws that hold the stereo in place, disconnect the wiring harness and antenna, and gently pull the stereo out of the dashboard. Reassemble in reverse order after installing the new unit.
Haynes repair manual, Dodge Neon 2000 thru 2003. Book #30036
Remove the decorative stereo cover. Remove the stereo retaining screws. Pull the stereo out and remove the wiring harness and the antenna cable.
To remove the stereo from a 2003 C180 Kompressor, start by carefully prying off the trim panel surrounding the stereo using a trim removal tool to avoid damage. Once the trim is removed, unscrew the mounting screws holding the stereo in place. Gently pull the stereo out, disconnect the wiring harness, and antenna cable from the back. Be sure to handle all components with care to avoid any damage.