To get the tail light out of the 1985 Toyota Cressida wagon, you will need to access the light from the inside of the trunk. Remove all trim from around the light and across the trunk latch. Then, remove the screws that hold the light and lens in place. You can then pull the light into the trunk.
Don’t know
Look in the trunk, there is a cover over the light assembly - open and you will have access to change the light.
Open trunk and remove screws that secure light assembly to car. Pull assembly straight back to remove from car. Remove the dead light and replace with proper new light. Install in reverse order of removal.
Question isn't clear. Are you asking how do you replace the bulb -OR- how to remove the entire lens assembly?
It's removed from inside the rear compartment. Open the rear hatch and on the inside of the light you will find a snap-off cover. open it and remove the light assembly with a 1/4 turn. The bulb assembly should pop out
Open the trunk; Remove the trunk liner; Remove the bulbs/wiring; locate the bolts securing the tail light assembly to the body; Remove the nuts; lift the assembly away. Cheers
Open the tailgate and look between the tail light assembly and the tailgates weather striping. You will see two galvanized Phillips head screws. Remove them and pull outward and the tail light unit will pop out. The bulbs are screwed into the back of the tail light assembly.
60 kms
If the check engine light is on for your 1991 Toyota Cressida, that makes that some repairs need to be made to the engine. Taking the car to a certified mechanic to perform a diagnostic test can confirm if there is any issues with the engine.
tail light fuse Toyota86 Cressida
On a 2012 toyota Highlander, How do you replace tail light Assembly