It depends on the type of glass. If it is on a window, try using a hair dryer to soften the wax, then dry paper towels to wipe it away. When it is down to just a thin residue, continue with dish soap and water. If it is a glass item that can be submerged, put it in a sink full of hot water (not boiling or hot enough to shatter it) and let it soak for a while. While it is still warm, wipe it away with paper towels. Replace the warm water and keep at it until it is gone. Wash it with soapy water to finish it.
Paraffin wax and gulf wax can be used for many things. You can use the wax to seal cracks in glass bottles, by applying the wax to the surface of the bottle and allowing it to dry.
if your melting wax in a glass container be sure you do so at 125 degrees. get a deep metal pan, fill half full with water, heat the water, put your wax in your glass container and put the container in the pan,WATCH IT CLOSELY.
A bikini wax is the process of using hot wax to remove pubic hair so that it is easier to wear a bikini.
Such a material is GLASS.
Put a cloth over the wax and use a hot iron over it.
Umm... i think it would be... hmmm... i dont really no. Maybe you should just wipe with water? (remember i said Maybe) Water will not remove wax. If these were was crayaons. The front of the LCD is a thin layer of glass so many solvents that will remove wax (and other marks) will not affect the glass but will damage any plastic (around the edges) so be real careful. Do not push hard the glass is very thin. I read (BUT HAVE NOT TRIED) the following: Use spray insect repellent and a rag to remove the wax / crayon marks. then common window spray to clean the glass.
Glass objects can be made through the lost-wax process
Glass objects can be made through the lost-wax process
Place the plate in the freezer for an hour or two. When the wax is thoroughly chilled and brittle, it should scrape off easily.
Solvent wax refers to solvents that remove wax. The solvent is able to dissolve, or get rid of, the wax.
You can remove all, or a majority of it, by placing an ice cube on the wax, then chipping it off the wax as it hardens from the ice.
wax poured into a special glass
bee wax
Hi. Water is generally the best method to remove unwanted wax :)
To remove the old wax from a surfboard, first soften the wax by putting it under direct sunlight, using a wax comb, scrap the board, and roll over the wax ball on the board to collect the remaining bits of wax.
Paraffin wax and gulf wax can be used for many things. You can use the wax to seal cracks in glass bottles, by applying the wax to the surface of the bottle and allowing it to dry.
First melt the wax you have collected and put it in a glass which has a shape you like and then dip a cotton thread at right middle of the glass and hold the cotton thread till the wax dries ,use ice to coll the wax faster . Warning : don't put the ice into the wax.