How to repair headlights on a 1999 Pontiac Grand Am?

Answer 1

I believe the bulb can be accessed from the rear of the lamp by simply raising the hood. once this is completed and you have a visual of the rear of the lamp you will need to simply turn the bulb to the left. this will allow it to be removed from the lamp assembly. once removed it is easier to remove the wire harness at the connector. simply pull the connector free from the bubl and discard the bulb. DO NOT TOUCH THE NEW BULB WITH YOUR HANDS. The oil on your hands can cause the bulb to explode when it reaches temperature. Simply connect the wire harness by pushing the connector back on the bulb and then inserting the bulb back into the lamp and twisting to the right.

If the lamp is not accessible fromt he back you may need to remove the lamp. If this is the case their should be a means by which to do this. It will either be a simple lever devise or a fastemer type of service. Ususally if you buy a bulb at a PEP Boys or any type of shop of this type they will replace it for you.