0
http://www.bodyshopzone.com/archives/mechanical/door/hinge/pin_replace_1.html
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you align 2004 Chevy Blazer door?
Replace the hinge pins and bushings.
How do you replace a hinge pin on a 1987 Chevy blazer?
break off the bottom bushing that hold door pin pick up on the door slightly use a hammer and screw driver to drive pin out and replace
Replace door hinge 1989 Mitsubishi Triton?
need to replace door hinge pin on 189 mitsibushi Triton tray back
How do you install new door pins and bushings on 2002 gmc Sonoma?
You replace the truck ...it comes with new hinge pins :((
Can you replace top door hinge with bottom hinge on 1992 ford explorer?
You can replace the top door hinge with bottom hinges on the 1992 as long as the hinge is for the cab doors. The hinges for the tailgate would not work on the doors.
How do you change a bad door hinge on a 1957 Thunderbird?
jack the door up on the end of it and unbolt the hinge and replace with the new one.
How do you adjust a door on a Chrysler LeBaron?
you might need to replace the hinge pins.. or the complete hinge
How do you replace a 96 thunderbird driver side door bottom hinge pin?
You have to replace the whole hinge assembly, they don't make a hinge pin kit for the Thunderbird.
How can one replace a cabinet hinge?
To replace a cabinet hinge, you must first remove the screws that attach to the door with either a screwdriver or a drill with screw bit. Next you want to remove the cabinet door. Once you have removed the door, remove the hinge from the cabinet. You can then attach a new hinge. A nice tip is to have a partner hold the door while you screw the hinge back in place.
How do you fix a sprung car door?
To fix a car door that is sprung due to a bent or damaged hinge, the best thing to do is replace the hinge. If the hinge is welded and not bolted to the vehicle, the entire door will have to be replaced.
How do you replace upper door hinge on 1996 Chevy blazer?
This is the most difficult hinge to replace on that vehicle. The original hinge is welded in place. The replacement hinge bolts in. In order to gain access to the back side of the hinge that is welded to the cab the entire dash assembly needs to be removed. Many times the original hinge can be rebuilt in place with pin and bushing kits and a little welding and drilling of the holes if they are damaged/oblonged. You will need a special tool to r&r the door hinge spring. This tool is available from your local auto parts store for less than $20.
How do you replace hinge pins on 2003 avalanche?
need to replace door hindge pins and bushing,how do we get door off safely.
