0
What else can I help you with?
How do you change a bad door hinge on a 1957 Thunderbird?
jack the door up on the end of it and unbolt the hinge and replace with the new one.
Can you replace top door hinge with bottom hinge on 1992 ford explorer?
You can replace the top door hinge with bottom hinges on the 1992 as long as the hinge is for the cab doors. The hinges for the tailgate would not work on the doors.
How do you fix a 1995 Ford Thunderbird's 'droopy door'?
You need bushings in the bottom door hinge. You might have to remove the finder to get to it. You might trying to go to a you pull it and find a good hinge from a 89 to 97 Thunderbird or Cougar. It would be less work.
How do you replace a hinge pin on a 1987 Chevy blazer?
break off the bottom bushing that hold door pin pick up on the door slightly use a hammer and screw driver to drive pin out and replace
Where to buy new lower door hinge for 95 Thunderbird?
junkyard or else napa has the hinge pins and rollers
How do you replace hinge pins on ford explorer?
You replace The hinge pins
How do you replace ford explorer rear window hinge?
To replace the Ford Explorer rear window hinge, you have to buy a similar window hinge. Use a screwdriver to open the hinge and replace the hinge but fitting it in the window.
How do you replace door hinge pin and bushing on Crown Victoria?
The pin will probably have to have the bottom end that is flared out cut off or drilled out. The pin can then be tapped out. This is easier if the hinge has been removed but then the door will have to be blocked up into place while the hinge is off.
How can I fix a door hinge?
To fix a door hinge, you can tighten the screws on the hinge or replace them if they are stripped. You can also lubricate the hinge with oil or grease to reduce friction. If the hinge is damaged, you may need to replace it with a new one.
How do you replace the door hinge pin on a 1997 Chevy pickup?
A guy I met who does body work told me that you impact the door pins out of the hinge. the bushings go bad on them so it causes the door to sag and not close properly. I just don't know if you have to impact hammer them from the top down or bottom up. I think its from the top down. post back if this is right or not. I need to replace the pins on my driver side door too.
How do you replace driver side door hinge on 2003 GM Envoy?
To replace the driver side door hinge on a 2003 GM Envoy, first, remove the door panel and disconnect any electrical connections. With the door supported, unbolt the old hinge from the door and the body of the vehicle, taking care to keep the door aligned. Install the new hinge by reversing the removal process, ensuring all bolts are tightened securely. Finally, reattach the door panel and reconnect any electrical components.
How do you replace hinge on a 95 Mercury cougar?
To replace the hinge on a 95 Mercury Cougar, remove the bolts holding the hinge in place. Find a replacement hinge from the manufacturer and install it using the right hardware.
