To replace the driver side door hinge on a 2003 GM Envoy, first, remove the door panel and disconnect any electrical connections. With the door supported, unbolt the old hinge from the door and the body of the vehicle, taking care to keep the door aligned. Install the new hinge by reversing the removal process, ensuring all bolts are tightened securely. Finally, reattach the door panel and reconnect any electrical components.
Change oil pump 2003 Gmc Envoy
To replace the driver's door hinge pins on a 2003 Chevy Express van, first, support the door to prevent it from falling. Remove the hinge cover and then use a hammer and punch to drive out the old hinge pins. Once the pins are removed, insert the new hinge pins and secure them in place. Finally, test the door's movement and reattach any removed components.
To replace the driver's side mirror on the 2003 GMC Envoy, first remove the interior door panel. Then, remove the mirror connection cover inside the panel as well. Unscrew the screws holding the mirror to the door. Remove the wiring and replace the mirror with a new mirror. Replace the screws and place the door panel back onto the door.
The 2003 GMC Envoy inline 6 engine does not have a timing belt but a timing chain. No need to replace anything unless the chain breaks.
need to replace door hindge pins and bushing,how do we get door off safely.
There are 2 small screws reachable through the rear-gate hinge. These need to be removed then pull entire light housing striaght back.
The diagram is under the hood. Pull tentioner to release tention remove belt/ replace
Just had to do this on my own envoy......You reach under the rear bumber and the light assembly simply unscrews from the housing. You replace the bulb and screw it back in. Takes 5 minutes.
$40 a piece for the sway bar links and $50 for labor
check this site 1st its not a straight forward job.. http://forums.trailvoy.com/search.php?searchid=1710816
Mike Hinge died in 2003.
how many gallons of gass will a 2003 GMC Envoy hold