regulater is riveted in
How to replace a window and regulator on a 1998 checy malibu?
where is the power window relay 1998 ford expedition
How do you replace a heater core in a 1998 Ford Expedition?"
need instructions on replacing window regulator
How do you replace a heater core in a 1998 ford expedition?"
The window motor is attached to the window regulator by screws. After removing the door trim you must detach the regulator from the door by drilling-out four rivits. Then remove the screws from the old motor and install the new motor. Re-attach the regulator with bolts and put the trim back on the door.
The engine computer is the voltage regulator, and yes you can replace it.
To fix a passenger window in a 1998 Chrysler Town and Country, first, remove the door panel by unscrewing any visible screws and gently prying off the panel clips. Then, check the window motor and regulator for any damage or disconnection. If they're faulty, replace the window motor or regulator as needed. Finally, reassemble the door panel and test the window for proper operation.
The window regulator assembly is not repairable, you will have to replace it if the metal wire has broken. Look on eBay they are around 40.00 for the whole assembly.
You will need a new regulator assembly.
Bad window regulator. The cables are not pulling evenly and it tilts the window.
To change the window regulator on a 1998 Pontiac Sunfire Convertible, first, remove the door panel by unscrewing the screws and gently prying it off. Disconnect the window switch harness and any other connected components. Next, remove the old regulator by unbolting it from the door and carefully taking it out, then install the new regulator by following the same steps in reverse. Finally, reattach the door panel and test the window operation.