0
wait state is a delay experienced by a microprocessor when accessing external memory or another device that is slow to respond. the vice versa also come into scenario. Now, to be able to access slow memory the microprocessor must be able to delay the transfer until the memory access is complete. One way is to increase the micro processor clock period by reducing the clock frequency. Some micro processors provide a special control input called READY to allow the memory to set its own memory cycle time. If after sending an address out, the microprocessor does not receive a READY input from memory, it enters a wait state for as long as the READY line is in 0 state. When the memory access is completed the READY goes high to indicate that the memory is ready for specified transfer.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How many instructions execute in one second in 8086 microprocessor?
The number of instructions that can execute in one second in the 8086 microprocessor is highly dependent on clock speed, memory wait time, and instruction complexity mix, but the generally accepted performance factor is 0.33 MIPS (Million Instuctions per Second) at a clock speed of 4.77 MHz.
How long is a wait state in 8086?
One clock cycle, repeated until READY is true.
How the speed of 8086 microprocessor can be increased?
To increase the speed of the 8086, you need to increase the clock speed, reduce the number of wait states, or both. You could also optimize your code so that it runs faster. Since the 8086 is a segmented memory architecture, it is more efficient to use operands in one segment and to make near references to them.
What is TEST pin in 8086 in microprocessor?
TEST This input is examined by a 'WAIT' instruction. If the TEST input goes low, execution will continue, else, the processor remains in an idle state. The input is synchronized internally during each clock cycle on leading edge of clock.
What are the ways for 8085 microprocessor to exit from wait state?
The only way to exit WAIT state on the 8085 is to assert READY. You could perform a reset, but the processor will still remain in TWAIT if READY is not true.
What is the wait state in microprocessor?
The wait state, TWait, is a extra clock cycle added to the machine cycle to allow time for external hardware to respond. During this extra cycle, none of the address, data, or control pins change state. Wait state is entered if READY is false (LOW) on the rising edge of clock following ALE. READY is sampled each rising edge of clock thereafter and wait state will not be exited until READY is true (HIGH).
What is a command to the processor to wait for slower devices to catch up?
It could be called either a buffer or a wait state.
What makes the N core perform better than the traditional?
The term "N core" means that the microprocessor contains 2 or more independent CPUs instead of the single CPU in the "traditional" microprocessor. The more CPUs in the microprocessor, the more instructions it can execute per clock cycle, because the extra CPUs work in parallel and usually do not have to wait for each other.
8085 microprocessor state the number of machine cycles and t-states required to complete the execution of the 8085 instruction mov m a?
The 8085 instruction MOV M,A requires two machine cycles and 7 T states. Cycle one is 3 T states for opcode fetch, plus 1 T state for opcode decode. Cycle two is 3 T state for operand store. These numbers do not include WAIT states. WAIT states are interposed between T2 and T3 of any memory access cycle, and the total number of WAIT states depends on the READY line.
What is NOP Instruction stands in 8085 microprocessor?
The NOP instruction is a no-operation instruction. It does nothing to the state of the machine, except to use some time. In the case of the 8085, it uses four clock cycles plus however many wait states are need to access the NOP instruction from memory.
What occurs when the CPU must wait for another component?
wait state (command for the computer to wait for slower devices)
A wait would live in what?
A state of anticipation.
