You can usually tell by looking at the treads. If they are falling apart or broken, it's time to replace them.
To replace stair treads and risers effectively, follow these steps: Measure the dimensions of the existing treads and risers. Remove the old treads and risers carefully using a pry bar and hammer. Cut the new treads and risers to fit the measurements. Install the new treads and risers using construction adhesive and nails or screws. Finish by sanding and staining or painting the new treads and risers for a polished look.
When replacing stair treads and risers in a staircase, it is important to follow these best practices: Measure and cut the new treads and risers accurately to ensure a proper fit. Remove the old treads and risers carefully to avoid damaging the staircase structure. Use a strong adhesive or screws to secure the new treads and risers in place. Finish the new treads and risers with a protective coating to prevent wear and tear. Regularly inspect and maintain the staircase to ensure safety and longevity.
Removing Old Stair TreadsBefore you can replace your old stair treads, you will need to remove them. You can usually do this by using a flat metal pry bar. Place the metal bar between the stair tread and the riser. Try to raise the tread straight up. You can continuously do this until you remove the tread. However, you should be careful and make sure that you do not make any marks on the risers. You also have to watch out for the skirt or the wallboard. You might need to loosen or remove these before you can remove the stair treads. However, it may be worth a shot to try to pull out the stair treads before you touch the wallboards. After you have managed to remove the treads, you can take out the nails out of the stairs.Making the MeasurementsAfter removing the older stair treads, you should cut out a piece of wood that is the size of the piece that you just removed. If you need to make measurements, then do not hesitate to do so. You should also make sure that the wood you plan to use is the same type of wood as the stair treads. Typical stair treads are made of oak wood or maple wood. If you have a different type of wood, you should try to get something that is as close to the original as possible. This is for safety reasons. Different types of wood wear differently. This can pose as a major safety concern. For example, if one stair tread is oak and the other is maple, your stairs could give out sooner than expected. All stair treads should be as close as possible to each other. Once you have made the proper measurements and gathered the correct wood, you should sand and plane the edges so that it is as rounded as the old stair treads.Installing the TreadsBefore you begin to install the new stair treads, you should pre-drill holes into the treads. These holes will be where you actually drill the nails in place. After you have drilled the holes, you can use the matching wood filler and add your finish.
You can go to any home appliance store such as Home Depot and Lowes for new stair treads. Amazon.com also sells stair treads, but it is not guaranteed that they will be in good condition and they will fit your stairs. I would recommend going to a home appliance store with proper measurements to make sure there is no room for error.
For safety and beauty, stair treads are a necessity in the home. If a staircase is made of hardwood, stair treads are a smart idea to prevent any falls. The most common and popular type of stair treads are the rubber ones. Many of them have a simple horizontal bar pattern with a taper return nose that makes them fit much better. Cleaning is easy and must be done within each bar. These stair treads are mainly used in commercial locations such as offices, bowling alleys, apartments and other such locations. The treads that are used in the low cost housing are made mostly of vinyl. These are also very plain and easy to clean, however, they come in more different colors. Braided stair treads are very attractive for the home and their friction will prevent any accidents on those hardwood stairs. There are also stair treads that come in a scroll. The microfiber ones are very popular and effective. The most decorative stair treads for the home are actually made of hardwood, such as oak, and there are also stair tread carpets that look wonderful in the house. They can be very pretty and can match the furniture in the room, and also go very well with the balusters. If the balusters are white, an elegant wood stair tread would offset the white very nicely. The only disadvantage to having wooden stair treads is that they can and will take a beating. To have them looking as good as new, they can be sanded. The best way to do this is to use a belt sander. It is very important not to sand off too much of the wood. Another thing to use to finish the wood to a satin-smooth finish is a scraping tool. If you aren’t comfortable doing this yourself, a professional would be able to come in and do the job perfectly. The wooden stair treads can also be stained. This is another method that needs to be done carefully. The stain should instantly be wiped as soon as it is applied to avoid too much staining. Three coats of stain should leave the stair treads looking fabulous once again.
The standard length of a stair tread is 13' with a height of 1'. To learn more got to "www.stair-treads.com". This website will answer any other questions you may have.
New treads for bicycles can be purchased from most high street bicycle shops. New treads can also be purchased online at sites such as BikeRadar and BicycleTires.
form_title=Stair Railing Repair form_header=12603 Please select a description for the problem you are having.*= [] Stairs creak [] Unstable staircase [] Railing pulling out of wall [] New railing needed [] New tread(s) needed [] More balusters needed [] Balusters are broken [] Repalce carpeted treads w/hardwood veneer [] Replace carpeted stairs w/runner and tread caps [] Other Which types of stairs require repair?*= () Interior () Exterior () Both
form_title=Metal Stair Railing Repair form_header=9883 Please select a description for the problem you are having.*= [] Unstable staircase [] Railing pulling out of wall [] New railing needed [] Baluster(s) needed [] New tread(s) needed [] Re-weld [] Re-paint [] Other Specify the type of material.*= [] Raw steel [] Wrought iron [] Aluminum [] Stainless Steel [] Galvanized steel [] Brass [] Bronze [] Painted [] Powder coated [] Wooden handrail [] Wood treads [] Other [] Don't Know Please specify the type of stairs. (Select all that apply)*= [] Interior [] Exterior [] Straight [] Curved [] Flared [] Circular [] Spiral [] Landing mid-stair [] Closed riser [] Open risers (no risers) [] Other
You may want to shop around for a used stair lifts, however, I found a great website that sells both new and used stair lifts. Please check out http://www.4-stair-lifts.com/. The best part is the company will buy back the stair lift when it's no longer needed.
You need new tires of the tread is wore down to the base of tire. put a nickel between the treads. head facing toward the tire. if the tread is not touching the head you really need new ones. if in the rain or snow u have trouble staying on the road. that is bad too.
Buying new tires would be the best way to improve tire tread.