When a vise grip is used, the tool tightens the pipes around the leakage, which as a result of tightening the pipes, will stop leaking. This is the best option in stopping a leakage.
PB blaster spray and a vice-grips PB blaster spray and a vice-grips
vice grips
you need to drop the gas tank and the filter is on top of tank you need fuel line disconnect tools and pull the fuel pump fuse you also wanna pinch the rubber hose off with vice grips the line will leak and leak.
vice-grips
Vice-grips, large screwdriver (leverage), and cursing.
I have special clamps similar to Vice Grips for this.
NO way to stop time in vice city
Hit the ball joint down so it is firmly seated then tighten up the nut. If the thread is slightly damaged then the tie rod may turn, in this case hold the end of the bolt with some vice grips to stop it turning and continue to tighten the nut. When the nut gets tight you will no longer need the vice grips, tighten up the nut and insert the split pin. How do you stop the ball jointsand tie rod ends from turning while trying to tighten the nuts?
Ever try a pair of Vice-Grips and a roll of 50 grit?
grab the broken end of the cable with vice grips and pull it
A simple pair of locking pliers (vice-grips)
take a pair of vice grips and pich the hose that goes to the caliper