a slab of a house suupported with RCC frame column & beam, What will be the bending moment in different spans.
ER. J.S.DEORI
nothing
if LY/LX>2 than we use one way slab if <2 than use two way slab.One way slab supported only two direction and two way slab supported in all four direction.
If there are no seams in it - it was not poured in sections, but as one continuous pour.
It's a case two.. in which a slab has three continuous sides (i.e. three sides are followed by other slabs ).
The basic difference between one way and two way slab is load distribution which is depends on support condition and span lengths.Mainly shorter span is carring larger load than longer span.This load distribution can be calculated considering the deflection at any point is same Shorter and Longer Span.
The slabs that are supported only at end are called simply supported slabs i.e. there is no intermediate supports in the slab and there will be no support moment acting on the slab.
you should consider the dist between walls .to answer this question what does it look like show sample
nothing
A solid slab is a reinforced concrete slab which is supported by beams or walls..
Supended slab are slab not sit on the ground directlySuspended slab is a slab supported by beams.
if LY/LX>2 than we use one way slab if <2 than use two way slab.One way slab supported only two direction and two way slab supported in all four direction.
If there are no seams in it - it was not poured in sections, but as one continuous pour.
It's a case two.. in which a slab has three continuous sides (i.e. three sides are followed by other slabs ).
The answer will depend on what information is available. Ideally, you know the length, breadth and height (in the same units of measurement) and simply multiply the three together.
Continuous casting machine can be classified according to a variety of forms. If according to the structure appearance can be divided into vertical continuous casting machine, vertical bending continuous casting machine, with straight section arc continuous casting machine, arc continuous casting machine, multi-radius oval continuous casting machine and horizontal continuous casting machine. With the development of continuous casting technology, and carried out the wheel type continuous casting machine, especially the thin slab continuous casting machine research.
Building a concrete slab is not difficult. Simply excavate the area where the slab is to go, and build a wooden box frame around it. Then, add crushed stone and pour the concrete on top. Finally, just smooth it out and allow it to dry.
The basic difference between one way and two way slab is load distribution which is depends on support condition and span lengths.Mainly shorter span is carring larger load than longer span.This load distribution can be calculated considering the deflection at any point is same Shorter and Longer Span.