it is simply the voltage of the system
They are RCA type connectors on the back of your Head Unit (Radio). There are 2 connections, usually blue and white, the cord for this has the same connectors on both ends. The Pre-Amp outputs are a direct line for the Signal from your Head Unit to go directly to an Amplifier (you will see similar connections on your Amplifier as you see on the back of your Head Unit), so when you run speaker wire from your Amplifier, the speakers will play the sound (Music) your Head Unit is producing no matter if its from the CD or FM/AM tuner or AUX input like from an I-Pod.Another AnswerA pre-amplifier, which is also known as a 'control unit', a high-fidelity unit which is separate from, but which must be used together with, a 'power amplifier'.Pre-amplifier/power amplifier units are normally regarded as 'high end' equipment and tend to be very expensive. The pre-amplifier unit is equipped with inputs for phono, CD-player, tuner, and various other auxiliary units and (usually) provides a single pair (right- and left-channels) audio outputs for connection to the power amplifier. The pre-amplifier is the unit which provides the volume control, tone controls, filters, etc., while the power amplifier simply amplifies the output from the pre-amplifier unit. The output usually takes the form of a pair of RCA connectors, usually colour coded white and red.Some 'home theatre' amplifiers provide a 'pre-amplifier' output, which bypasses its internal power amplifier, for the purpose of adding external power amplifiers, if desired.
The amp is under the drivers dash, below instrument cluster, behind panel.
...of what? to a house, to a breaker (to lower fault current level?), to an amplifier circuit?
normal amplifier is a mathametical operation analog the computer, magnetic amplifier is sound operation of the signal
A pre-amp is a type of amplifier used in sound systems. It usually amplifies the signals coming from microphones or low amplitude signals coming from any other sources. The pre-amplified signals can then be amplified to a greater extent when the signals are sent to the main amplifier. Because some microphones are low voltage or are wireless the signals are weak compared to older style microphones.
look for it
under center console
They are RCA type connectors on the back of your Head Unit (Radio). There are 2 connections, usually blue and white, the cord for this has the same connectors on both ends. The Pre-Amp outputs are a direct line for the Signal from your Head Unit to go directly to an Amplifier (you will see similar connections on your Amplifier as you see on the back of your Head Unit), so when you run speaker wire from your Amplifier, the speakers will play the sound (Music) your Head Unit is producing no matter if its from the CD or FM/AM tuner or AUX input like from an I-Pod.Another AnswerA pre-amplifier, which is also known as a 'control unit', a high-fidelity unit which is separate from, but which must be used together with, a 'power amplifier'.Pre-amplifier/power amplifier units are normally regarded as 'high end' equipment and tend to be very expensive. The pre-amplifier unit is equipped with inputs for phono, CD-player, tuner, and various other auxiliary units and (usually) provides a single pair (right- and left-channels) audio outputs for connection to the power amplifier. The pre-amplifier is the unit which provides the volume control, tone controls, filters, etc., while the power amplifier simply amplifies the output from the pre-amplifier unit. The output usually takes the form of a pair of RCA connectors, usually colour coded white and red.Some 'home theatre' amplifiers provide a 'pre-amplifier' output, which bypasses its internal power amplifier, for the purpose of adding external power amplifiers, if desired.
Locate is a verb. For example: Engineers worked to locate the fault responsible for the earthquake. Locatable, a derivative of locate, is an adjective. Location is a noun.
The amp is under the drivers dash, below instrument cluster, behind panel.
You can, but it will not sound loudly. A microphone always needs a pre amplifier.
This is un-amplified audio, you might send to another amplifier.
To increase the signal-to-noise ratio of an audio signal prior to input into the main amplifier. The SNR is generally increased using a differential amplifier. Oftentimes this is unnecessary, and the purpose of the preamplifier is to increase the signal voltage prior to amplifying the current in the power amplifier stage.
...of what? to a house, to a breaker (to lower fault current level?), to an amplifier circuit?
generally you can locate any old amp on ebay... also google the model number
Sure you can. THey might be difficult to locate.
It is simply the voltage of the system before the fault occurs.. Most probably this is the voltage of healthy system...