0
How would you design a set off lights so that when one light fails all the other lights stay on?
Wiki User
∙ 16y ago
The simple answer is to wire all the lights in parallel. In a bathroom vanity light, sometimes we see a number of light bulbs in the fixture. If one bulb fails, the rest stay lit. They are wired in parallel.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
What lasts longer a dimmed light or a fully powered light?
The mechanism that fails in an incandescent lights is the filament. It degrades over time because of current flow. Hence, you would expect the dimmed light (less current) to last longer. This would not necessarily be true for other types of lights.
Why would the third brake light work on a 1996 Chevy Monte Carlo but not the other two brake lights work?
this tells you is a simple wiring problem.most likely a loose wire from the third light to the other lights.(third lights provides the power to the other lights)
If a light bulb is missing in a series circuit will the bulb light?
If one light bulb in a series circuit fails, all the other light bulbs will go out, until the failed bulb is replaced and the series circuit is completed again.If one light bulb in a parallel circuit fails, all the other light bulbs will still work.
How do lights in a building work?
like any other light
What is cool light?
The light which comes from Florescent tubes is called COOL LIGHT. Another example is L.E.D. lights as well. The light other than Halogen Lights is cool because Halogen Light is warm light.
Why does the brake light not light up when you turn on the light but it light when you brake?
This is operating as intended. Brake lights are only activated when the brake pedal is pressed, irrespective of the other lights in use. It is a safety feature so vehicles behind are aware the brakes have been applied. They are separate from the tail lights so they still give a visual indication of braking whether the other lights are on or off.
Why would you have no brake lights but all the other lights work?
Blown fuse or bad brake light switch?
Can Piaa 510 fog lights be installed into the existing positions where the factory fog lights are installed on a 2005 Ford Escape?
The PIAA 510 fog lights are not the proper size to fit in the front bumper fascia where the factory fog lights are mounted. Additionally, there is no mounting point on the Escape to hold the PIAA 510 fog light. The PIAA 510 has a universal design that allows for mounting on a vehicle with enough clearance for the size of the light. It is ideal for newer vehicles that were manufactured with bumper light sockets. For the complete line of PIAA fog lights and driving lights visit AutoLights4Less.com. They offer PIAA and many other fine brands of headlight bulb, headlight assemblies, tail light assemblies, fog lights, driving lights and turn signal lights.
What well happen if the light bulb was not invented?
We would use other sources of light such as fluorescent light tubes or neon lights.
What do you do if the brake lights work but not the tail lights?
i got a 2006toyota highlander my tail lights dont work but,every other light works please help me
What type of circuit off all lights when you take on bulb out?
If you remove one light from a chain of lights, and the other lights turn off, then it is a 'series' circuit.
How do you fix the problem of a 97 expedition brake lights not working but all other lights are working?
Check the brake light bulbs, Check the brake light fuse, Check the brake light switch, In that order.
