Want this question answered?
You can turn a web cam into a TV video cam by connecting the web cam to your computer and then connecting your computer to the television. Depending on the type of web cam, you may be able to connect it directly to the TV.
Yes it could you should have your a check up done for your car.
i no If a lobe has worn off it is possible that you could just replace the cam but more than likely there is more wrong. If the cam is broke, it would take other things along with it. Depending on the type of motor, this could mean a new head or the complete motor if it is not over head cam.
pear shaped cam circle shape cam square shape cam triangle shape cam oval shaped circle cam is something that you turn in order to move the follower:)
qwertyuiop
cad is a 2d drawing then use cam the laser cutter and turn it into a 3d model
just connect the web cam and open it on any messenger and take test for web cam
It could, along with numerous other things.
How do you loosen the timing chain to install cam gear?..... Fact is: You don't, All you have to do is FIRST: aline the timing marks on the cam and crank gears ( they may aline facing each other or both off to one side. Caution: timing marks may be on the chain itself ( different color links, if this is the case then the timing will be of to the side ) Just rotate the crank until one or the other occurs Do Not allow either the cam or the crank to turn while the chain is removed ) Then remove the bolts in the Cam gear, and gently tap and pry on the cam gear till it comes of the end of the cam. Again: Do Not allow either the cam or the crank to turn while the chain is removed! Reverse procedure to reinstall. Be sure the new chain is timed exactly the same as the old one was.
Yes!Yes!
Timing chains and timing belts are used to turn the cam shaft. The term timing chain or belt is a misnomer. They are really just a cam chain or cam belt.
When you turn a cam, the rod stays on it for the whole time. So if you cut out or add a piece to the cam, it changes the affect on how high or low the action goes.