You will need to provide more information.
take inside door panel off and unbolt outside door handle from the inside.
take the inside door panel off and you will see the bolts that hold the handle on, take the bolts out and unhook any linkage to the handle and pull the handle off from the outside of the door, just reverse directions to install the new handle.
No, there is not a diagram to take apart the outside of a door handle. However, there is a diagram that shows how a door is held together, and from there a person can take apart the outside door handle.
you have to take the door panel off the inside first
from the inside. take your door panel off and look around in there. the door handle is usually held on with pop rivets that have to be cut off from the inside of the door.
Roll the glass up and then take inner door panel off and deflector water paper, unhook all the rods to the door handle and take the 2 -10 mil. bolts out of the handle and pull the handle out.
Take inner door panel off and look inside the door and you will probably find a rod off the outside door handle.
you will have to take the door panel off from the inside then there should a flim or plastic held on with putty, just pull easy and it will come off and your linkange and handle are right there
Take the 2 bolts or screws out, pull the handle out a little bit and pop the clip off.
Take the end cap off, unscrew the screw in the handle, take off handle, put exact same new handle on, screw it down, put cap back on.
You have to take the door handle off first. To do so, you will have to pop the little things behind the dorr handle grip. Then take out the screws that are there. Then pop the things in the panel that the pull handle is on. Then take the panel that is by the pull handle off. The rest should just pop off. -Antwon00
My problem was the outside handle wasnt working, and the childlock was put on, and door closed. To open a door I couldn't get open from either side, I unscrewed the handle from the inside. I pulled the rod with my fingers, and it opened, then I put the rod on the one from the inside handle. I'm still figuring out how to take the panel off, or get to where the rod is on the outside handle. I cant reach far enough to put the rod back on the handle for the outside, so any help on that would be nice!~