Well when you decant the water through the filter, it will filter the water and leave the sediment behind for you to see on the filter.
not sure
A mixture of sand, lime, and water, used as a lubricant to help move stones, is mortar. Mortar. slick. Mortar.
They would throw sand or dirt on it, stomp it out, or pour water on it.
Being dry means free of any liquids. Since water is a liquid and sand is a solid, sand is actually much drier than water.
Mortar. Although mortar that dries whilst packing around stonework will adhere the stones to form a structure.
The ship would have gotten stuck in the sand. The water wasn't deep enough for the large ship.
Not sure what is meant by mixtures? But, the sand and water can be heated to evaporate off the water, which can be condensed back into water. This will leave the sand behind.
If you stirred water and sand together, you would have a mixture of water and sand until the sand sinks to the bottom.
get a strainer to get the sand out silly :)
First decant the water - the sand will be left behind. Then evaporate the water and the salt will be left behind.
Sand in water is a mixture. Because you can differentiate between the sand and water, it is a heterogeneous mixture.
Sand in water is a mixture. Because you can differentiate between the sand and water, it is a heterogeneous mixture.
A simple filter would do it. Or allow to settle and siphon/decant the water off. Otherwise evaporate and re-condense the water.
Sand, marbles, and water can be a mixture.
In order to separate sand and salt without filter paper you need to place mixture in container with an excess of water. You use an excess of the solvent so that you decant the salt water with a pipette or what ever you are using. Remember you will want to stir the mixture so salt goes into solution. You can repeat adding water to your liking and removing more salt water and then dry the sand.
You would not add sand to a mixture intended as a lubricant.
Yes
It would be a suspension.