If your HP printer isn't printing from your computer, there are several steps you can take to troubleshoot the issue before reaching out to HP Printer Support. Here's a quick guide to help you fix the problem:
Wired printers: Ensure the USB cable is securely connected to both the printer and the computer.
Wireless printers: Make sure the printer is connected to the same Wi-Fi network as your computer.
Ensure the printer is on and has no error messages (e.g., paper jams, low ink/toner, etc.).
Check if the printer is set as the default printer on your computer.
Restart the printer: Power it off, wait 30 seconds, and then power it back on.
Restart the computer: Sometimes a simple reboot can fix connection issues.
Go to your printer settings on your computer and clear any pending print jobs in the queue that might be causing the issue.
Sometimes outdated or corrupted drivers can cause printing issues. Uninstall and reinstall the printer drivers from the HP website or use the HP Smart app to reinstall them.
Ensure your printer firmware and computer operating system are up-to-date.
If possible, try printing from another computer or device to determine whether the issue is with the printer or the original computer.
When to Contact HP Printer Support:
If none of these steps work, it might be time to reach out to HP Printer Support for further assistance. They can help with more complex issues such as hardware failure or advanced troubleshooting. You can contact them via:
HP Support website: support.hp
Phone support: Find the number specific to your region on the website.
In your case, if the problem persists after trying these steps, HP Printer Support can guide you through additional solutions or help you determine if your printer needs repairs.
well i don't think its the printer that's the problem it could be the computer that's the problem so all you have to do is get a new computer and than see what happens
It depends what kind of printer and ink you have a high quality printer and cheap ink wont go well.
Check for paper jams. Instruct computer to cancel all print jobs then reset printer memory by unplugging printer from electric outlet, wait 10 seconds and plugging back in. If it still doesn't work, check the following: Make sure paper trays are installed correctly. Do you have sufficient ink/toner? Are ink/toner cartridges installed correctly? Is printer cable connected correctly? Is printer cable good? They can short out. Is the printer designed to work with your operating system? Is correct driver installed? Is the printer set as the default printer? Do you know printer is functional? Try connecting printer to another computer.
The website/webpage could be copywright protected. Simple solution just copy paste to Microsoft Works or Word. Then print.
Download the drivers for your Lexmark printer at: http://support.lexmark.com/perl/support/support.cgi?ccs=229:1:0:0:0:0 There is not a compatibility issue with these products.
- your computer wont work properly.- you wont be able to print anything out.- and your computer wont load fast.
A dual-bay ink jet printer is designed to not print unless both bays have cartridges inserted. If you aren't printing color documents, you can leave an empty color cartridge in the color ink bay and the printer will work because all printing (even color) includes the B&W cartridge.
Well if you have a printer at home use that! or you can just go to your library/ICT room at school and politely say can i print of my homework which you could of either put it on a memory stick or emailed it to yourself they wont mind!
I dont know how to hook up my brother wireless printer! and when i put my sd card in i say print and hit the button but it wont work! Its been saying printting and no paper comes out! HELP ME!!! PLEASE!
you just simply turn off your printer and unplug some of the cables connected to the printer and re plug them again.... turn off your computer so it wont get messed up...hope it works :)Or, go to printer icon and click on cancel printing.
Why would you even want it to support Open GL
Because he is a pita monster