Why bypass amp just get wiring diagram and hook up remote"blue wire" to the remote lead from factory amp. Or unplug amp use a meter and check which wire has power. Then turn off radio and check wire again should have no power with radio off. This will only work if factory radio is still installed. But that wire would be remote wire. Just hook up new radio remote wire to the found wire. Then connect speakers to factory plugs and use the amp.
Remove the retaining cover from your factory stereo. Remove the factory stereo retaining bolts. Slide the factory stereo out. Remove the wiring harness and the antenna cable from the back of the factory stereo.
Remove the 2002 Dodge Durango factory stereo decorative cover. Remove the factory stereo retaining screws. Pull the factory stereo out. Remove the wiring harness and the antenna cable from the back of the stereo.
What part is required to connect a mono amp to a factory stereo
Where is factory stereo amp located on a 2007 Cadillac cts
Yes
color codes for wiring on factory stereo on 2008 Nissan sentra?
To remove the factory stereo on 1996 dodge ram 1500 you need to pop the hood on the Ram and remove the ashtray. Slide the stereo out of the dash and unplug the cables from the back of the stereo.
Yes
I am having the same problem. Got the tool used to do it, but no luck pulling it out. I am about to try a crowbar LOL
Has it always been like this or not? If it is, then it is not really a problem. It is how the stereo was installed. An stereo can be installed to be turned on whether the engine is on or off. If the stereo cannot be turned off at all, then you have a problem with your stereo.
not the factory, but any dealership will do
yes