answersLogoWhite

0


Best Answer

You can either identify the relay which goes to the compressor clutch and run a jumper from either the 30 or 86 post to the 87 post, or you can unplug the low pressure sensor and jump the wire between the posts in the plug. I have to question this method, especially since you really don't want to be running that system when it's dry. If I've ever had to run the AC during charging, it was always towards the end of the charge, and it might need to pull some vacuum to help get the last few ounces of refrigerant into the system... the refrigerant carries the PAG oil which lubricates the compressor, and that's why you'd never want to run that system dry.

User Avatar

Wiki User

7y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

7y ago

auto manual says that I need to put jumper wire on the pressure switch so the compressor will operate during Freon charging?

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: I have 2006 ford 500 need to know where to put a jumper wire on the airconditionercompresor pressure switch to make air conditioner compressor run while charging with R Freon?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the role of a compressor in an air conditioner?

it increased the pressure and temperature of the refrigerant.


What is the role of compressor in a air conditioner?

it increased the pressure and temperature of the refrigerant.


Where is the low pressure charging port for a 2003 mercury mountaineer?

You can find the air conditioning low pressure charging port on top of the air conditioning compressor. The low pressure port will be on the right hand side of the air conditioning compressor.


What side of the compressor should liquid be add when charging?

The low pressure side.


Where is the low pressure air conditioner valve on a 2003 Chrysler Town and Country?

The low pressure air conditioner port can be found on the top of the air conditioner compressor. The low pressure port should be labeled as such.


When charging a system with a low pressure control and the control keeps shutting the compressor off you should?

When charging a system with a low pressure control and the control keeps shutting the compressor off, you should:


Why does Air conditioner compressor not stay on?

Because you are low on freon or bad pressure switch will also stop compressor to stay on.


How many psi gas charging of split type air-conditioner required?

A pressure for air-condition is between 60 ~ 70 psi charging of split type air conditioner is required.


Where is the ac low pressure port in a 98 jimmy?

The 1998 GMC Jimmy air-conditioner low pressure for is located on the top of the air conditioner compressor. The low pressure port will be marked as such.


Where is the low pressure line Ac line for a 93 camaro?

The low side hose is the larger one coming from the a/c compressor to the a/c compressor... The high pressure charging valve is located either on the high pressure line or the muffler, and the low pressure charging valve is located either on the accumulator or low pressure line.


Where is the low pressure air conditioner charge fitting located for a 1996 jeep?

Back of the compressor.


Wherer is the air conditioner's low-pressure service port in a 2000 acura 3.2TL?

The 2000 Acura air conditioner low pressure service port can be found on the top of the air conditioner compressor. The low pressure service port will have a blue top.