Want this question answered?
To reset the light, turn your ignition to on, then press the gas pedal 3 times, then start the car. To reset the light, turn your ignition to on, then press the gas pedal 4 times then you will hear a beep, then start the car.
With the ignition key off, press and hold the odometer reset button, and turn the ignition on and do not start the car. In about 2 seconds the light will reset.
Put the key in the ignition and turn it into the run position, but don't start the car. Leave the key in the ignition until the security light stops flashing. The car will start now.
to reset the alarm system for a Mercury Sable when the alarm is causing the car not to start, place the key in the ignition. Turn the key only about halfway and leave it in this spot for 10 minutes before trying to start the car.
To reset the electric immobilizer you must put the key into the ignition and slowly turn it. You should see the lights in the car start to turn on.
* Hold down the odometer reset button with the ignition off * Wait for the trip indicator to show 0's. Then turn the ignition on, but don't start the car * Let go of the reset button, and press the Min. button.
With ignition off, press and hold "select" and "reset" buttons, (the ones used for trip odometer). Then turn on ignition, but don't start car, hold until light goes out.
To reset the alarm on a Corolla 1993, place they key in the ignition and turn it until it clicks. Keep the key in this position for 10 minutes and then start the car as normal.
With the ignition off press and hold the odometer button (it is on the instrument cluster), turn the ignition on but do not start the car, continue holding down the odo button until the oil light begins and ends flashing. Turn ignition off, start car to make sure it worked.
Depending on the type of service light, the Holden Cruze offers and easy way to reset the light. Turn the ignition to on, but do not start the car. Depress the accelerator three times within five seconds, and then turn the ignition off.
Start the car
Put the key in the ignition and turn it to the on position. Leave in this position for ten minutes. Turn key to off then to start. This should reset the security and the car should start right up.