Here you go (just learned this the hard way): # 2 lines go to the fuel tank: 1 all the way to the bottom, this is the fuel supply line and should have a good fuel filter on it; the other should only go in to the tank 1/2" to 3/4", this is the fuel return # the above mentioned fuel supply line connects direct to the carb on the chain side of the saw # another third hose connects the carb (on the starter side) to the inlet valve of the primer bulb (this is the shorter protrusion of the primer bulb) # the outlet valve on the primer bulb connects to the fuel return hose that goes back to the tank good luck
Try Ebay. There is a chainsaw manual store on ebay. I bought a few vintage ones from them.
On ebay
I do? Why do you ask?
Click on the link below for your manual.
You can get the owners manual from Husqvarna.
My 16" Craftsman 36 cc chainsaw manual calls out for a Champion RCJ7Y....if that is the same size chainsaw as yours, I would go with that plug.
You should always check the owners manual for your specific brand of chainsaw for fuel recommendations. If, like me, you bought a chainsaw that did not come with an owners manual many can be found online at the manufacturers website. Most chainsaws require oil to be mixed with the fuel.
My aunt and uncle have this same saw, they downloaded a manual from http://userguides.50webs.com/
If you go to sears partsdirect and put in your model number you can get an owners manual directly from them. http://store.chainsawr.com/
A clutch.
look on the housing for a # to call...it should be a 1-800 number
According to the manual, 50:1 (2%) for all engines.