an intake air temperature sensor is a sensor that is used to measure the temperature of the air that flows through your intake manifold into your engine.it is usually posisioned on the intake filter housing.
The 1994 Jeep Grand Cherokee IAT sensor can be found attached to the air intake hose. The IAT sensor will be near the air filter box.
Where is the speedometer sensor located in a Jeep Liberty 2002?
The IAT, Intake Air Temperature, sensor is located in the air filter box. Look for it to be plugged in to the side of the air cleaner box with a wired connector going to it.
On a 1990 Jeep Wrangler, the IAT sensor is located on the intake manifold. It is a gray, two-wire system situated on the front of the manifold.
It is on the right front corner of the intake manifold. It has two wires and points out at a 45 deg. angle.
It is in the engine block area.
The iat sensor is the front sensor on the intake manifold it has a gray 2 wire plug that is the 4.0 lt the 2.5 the sensor is the back sensor on the manifold.
on the intake
On the front passenger side corner of the intake. It has two wires.
I think iat stands for intake air temperature --- if so then there will be a sensor mounted in the ducting between the air filter and the throttle
The iat sensor is also known as the mat sensor which is the manifold air tempeture. it is located on the front of the intake manifold. its a 2wire gray plug
It's located on the intake manifold itself.