The IAT, Intake Air Temperature, sensor is located in the air filter box. Look for it to be plugged in to the side of the air cleaner box with a wired connector going to it.
The cam sensor is inside the distributor.
The engine computer uses the engine coolant temperature sensor to decide when to run the electric radiator fan. It is located very near where the upper radiator hose attaches to the engine.
it is located in the distributor base. look above/right of the oil filter. for a 4 liter engine
The cam sensor is inside the distributor.
The 1998 Montero Sport crankshaft sensor will be located on the rear of the engine. The crankshaft sensor is on the inside of the rear engine cover.
it is right next to the oil filter
The shift solenoid B is located on the engine section on the automatic transmission for the 98 Jeep Cherokee 4x4 Sport.
I do not believe there is such a thing as a tcu. there is an ECM (engine control module), and a TPS (throttle positioning sensor) TCU: Transmission Control Unit. On a Jeep Cherokee (not sure about the Grand Cherokee), it's located on the passenger side behind the dash. You can reach it from the bottom without removing anything, but it is easier of you remove the bottom of the dash.
its located in your MAF on the air intake ========================================================== The Mass Air Flow sensor is located between the engine air filter housing and the engine air intake tube on your 2004 Ford Explorer Sport Trac
There is no knock sensor on a 94 4L jeep engine. In 1991 when they changed to the 4L HO motor, they removed the knock sensor from the system.
center drivers
location of relay for heated o2 sensor 1999 jeep Cherokee sport