DIRTY ICE MAKER WATER VALVE OR BROKEN VALVE
This unit has a water dispenser on the front but not one for ice.
The water line where it enters the ice maker could possibly be frozen.
Opens and closes an internal valve to provide/cut-off water to the icemaker - responds to pressure signal from the ice-maker to deliver/cutoff water - ice-maker signal activates an electric solenoid that open/closes the valve for water flow.
The water pipe from the pump to the ice maker is quite thin; check it to see that it is not plugged. Check to see that there is water also at the inlet to the water pump. If there is not, check that the pipe leading to the water pump is not plugged.
Most refrigerators in use today have ice makers that may stop working from time to time. The refrigerator’s ice maker receives its water supply from a water valve. The water valve is the first component of the refrigerator that should be checked when there is a malfunction with the ice maker. To operate, the ice maker closes an electric circuit enabling the water valve to open. Water will then flow through the water valve into the ice maker. The ice maker will then begin the process of making ice cubes and placing them in the ice tray. The water valve has a filter that keeps out particles from entering into the ice maker through the water supply. These particles can sometimes build up at the water valve filter and may even block the flow of water to the ice maker. When the flow of water in the water valve is restricted due to build up, it can cause the still water freeze in the valve. One solution is to heat the water valve with a hair dryer to melt the ice buildup in the ice maker. Be careful not to heat the plastic of the refrigerator too much causing it to melt. These particles can also lock the valve in the open position filling up the ice maker to excess. Sometimes an open solenoid coil winding can cause the valve to remain closed. This will not allow the water to flow to the ice maker as the plunger remains closed. In order to do further tests on the refrigerator to determine the fault with the ice maker is to test the current flow. This will not only be a safer measure for you as you attempt to repair your ice maker, but will also ensure the various components are operating as they should. Your diagnosis will most likely be related to the water valve, but if your refrigerator is old it could mean your ice maker needs to be replaced. Occasionally the electrical connections can sometimes get short circuited or disconnected during use. Thoroughly examine all the parts of your refrigerator with the proper tools and testing equipment.
1. Impurities in the so-called clean water. 2. Impurities from the ice maker.
If your ice maker isn't working and your water despenser is, it is most likely that your ice maker is having a problem freezing the water. Without a more detailed examination, it is impossible to say what exactly is wrong. You should call the company that manufactured the product and ask for help.
only if you have an ice maker.
Check to see if the hose that goes from the water source (under the kitchen sink) to the ice maker isn't pinched off, or that it hasn't come disconnected.
repair ice maker
how to get the ice in a maker to drop