If you are asking the tune up spec its
10 degrees BTDC at 800 RPM
If something else please rephrase.
Are you trying to imitate Transformers or something?
if you use the computer if the 85 is efi
Main caps should be torqued at 76 foot pounds for the 22r.
Around 4.5 qts.
under the oil filter
Yes, it is an interference motor. The valve could contact the pistons if it was out of time.
it could be under the bed on the passenger side on the frame!
Firing order :1-3-4-2 Cheers!
.2mm for intake and .3mm exhaust. or .008in and .012in when the motor is warm. not sure for cold motor.
1985 was the last year of the rear wheel drive celicas. As far as I know, no front wheel drive celica used the 22r motor. If it truly is a 22R motor it will fit the pickup, provided the pickup has a 22R motor. Some of the later ones have a different 4 cylinder or V6 motors. Of course, the induction and exhaust systems will be different in the car and pickup, but those from the pickup should bolt to the replacement 22R motor.
no u will have to change the motor mounts
yes, it should fit. you may have to adjust how it mounts thought if the 4 runner was originally a v6.