It is called an "unbuffered dimm"
Unbuffered DIMM.
No, a DIMM (Dual In-line Memory Module) cannot support both registers and buffers simultaneously. Registered DIMMs (RDIMMs) use a register to help manage data signals, while buffered DIMMs (BDIMMs) include a buffer that can further enhance signal integrity and allow for more memory modules on a motherboard. Each type is designed for specific use cases, and their architectures are incompatible with each other.
Registers represent the number of memory locations. A 2K memory chip has 2x1024=2048 memory locations. Hence there are 2048 registers in a 2K memory.
registers
Cash register School Register -------------------- processor register User-accessible Registers Data registers Address registers Conditional registers General purpose registers Floating point registers Constant registers Special purpose registers Instruction registers Model-specific registers Control and status registers Memory buffer register Memory data register Memory address register Memory Type Range Registers Hardware registers
In a 128x4 microchip, there are 128 memory cells, each capable of storing 4 bits of data. This configuration implies that there are 128 registers, with each register corresponding to one memory cell. Therefore, the microchip has 128 registers and 128 memory cells.
Yes, registers are a type of memory within a computer system that store data temporarily for quick access by the CPU.
Registers are memory locations on the microprocessor itself (not in main memory). In RISC architectures generally most operations (add, multiply, etc) must take there input from registers and write their output to a register. Since registers are located directly on the microprocessor, they represent the fastest form of memory in the computer, and also the type of memory available in the least quantity.
RISC machines operates on registers to prevent in large amount of interactions with memory
The fastest type of memory on a computer is the registers that form the execution model of the processor.
The opcode fetched from the memory is being decoded for the next steps and moved to the appropriate registers. Fetch operands from memory if necessary: If any operands are memory addresses, initiate memory read cycles to read them into CPU registers.
SS