If a three phase motor loses one leg it will do neither of what you suggest. To change the rotation of a three phase motor any two motor leads must be interchanged. When one leg of a three phase system goes down it is said to be single phasing. The overload protection on the motor senses the higher current on the other two legs and trips the overload heaters. This in turn drops the contactor open and disconnects the motor from the supply.
Yes, reverse any two phases will reverse the motor direction without harm to the motor. Just make sure whatever the motor turns will not be harmed by the reversal of direction!
It depends on if the motor is an AC motor, or DC motor. DC motors only run backwards when the voltages get crossed between + and -.
Electric Generator. :)
it burns
It is a type of transmission where you can shift forwards to backwards or the other way around with out having to come to a complete like normal tractors have to.
Yes, just swap any two wires to reverse it
the magnets in motor were backwards alls good thanks for the help
It depends on if the motor is an AC motor, or DC motor. DC motors only run backwards when the voltages get crossed between + and -.
Electric Generator. :)
Rotom (backwards for Motor)
By connect a starter motor backwards I assume you mean put the negative cable where the positive cable would go and then put the positive cable to the negative connection. In that case the starter motor should run backwards. That might be a handy thing to do if you are using a starter motor to power something else such as a winch or maybe a pump.
Yes. You can run it backwards, spin the rotor of the motor and take electricity out.
That's the motor, which burns fuel and propels the boat.
it burns
Is it a new starter motor? It may be incorrect.
it burns thats it
yes. that's how they work!
No, unless it is a three phase motor and you reverse only two of the phases.