0
If an input force of 202 n is applied to the handles of the wheelbarrow in the sample promblemHow large is the output force that just lifts the load?
Wiki User
∙ 8y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
A broom is an example of a machine. where are the input and output forces applied?
The applied force to the end of the handle is the input force and the output force is when the broom sweeps over the floor.
What is the input and output of a load cell?
The input of a load cell is the force or weight applied to it. The output of a load cell is an electrical signal, typically in the form of voltage or current, that is proportional to the applied force or weight.
If 110 V ac is applied to the primary what is the output potential difference?
This answer should contain the amount of turns that the primary and secoundary have.
Definition for mechanical advantage?
mechanical advantagenumber of times the input force is multiplied by a machine; equal to the output force divided by the input force.-noun Mechanics.the ratio of output force to the input force applied to a mechanism.Use mechanical advantage in a SentenceSee images of mechanical advantageSearch mechanical advantage on the Webmechanical advantagen. The ratio of the output force produced by a machine to the applied input force.Science Dictionarymechanical advantage (mĭ-kān'ĭ-kəl) Pronunciation KeyThe ratio of the output force (acting on a load) produced by a machine to the applied effort (the input force). See also efficiency.The American Heritage® Science DictionaryCopyright © 2002. Published by Houghton Mifflin. All rights reserved.Cite This Source
What is the Difference between input work and output work?
Efficiency of the device. How much work is applied to an object to make it move vs how much energy the object recieves.
If an input force of 202 n is applied to the handles of the wheelbarrow in the sample problem how large is the output force that just lifts the load?
Don't you understand ? You need the result of the first part of the problem in order to answer THIS part.
If the output force is located between the fulcrum and input force what kind of lever is it?
It is a second class lever.One example is the wheelbarrow - the wheel is the fulcrum, the input force is at the handles where you lift and push, and the output force is what's carried in the wheelbarrow.
Where are the input force and output force on a pair of scissors?
The input force or the effort on a pair of scissors would be the force applied by your hands on the handles. The output force or load would be the blades of the pair of scissors.
A broom is an example of machine where are the input and output forces applied?
The applied force to the end of the handle is the input force and the output force is when the broom sweeps over the floor.
How the cymbals sound affectwether is loud or soft?
The amount of pressure applied when playing the Cymbal will affect the sound output. The more pressure that is applied, the louder or softer the noise output will be.
A broom is an example of a machine. where are the input and output forces applied?
The applied force to the end of the handle is the input force and the output force is when the broom sweeps over the floor.
What is the input and output of a load cell?
The input of a load cell is the force or weight applied to it. The output of a load cell is an electrical signal, typically in the form of voltage or current, that is proportional to the applied force or weight.
What will be the output of the integrator circuit if step function is applied?
Triangular wave
A comparison of the input force applied to a machine to the output force it must overcome?
Pulley
What is output arm?
The end of a lever that carries the load is the output arm instead of the input arm which is the end of a lever that force is applied to move the load.
What is input output console in c language?
There is no 'console' in C-language, but there is a standard input, a standard output and a standard error. They are pre-opened files (file-handles) you can use in your program without knowing what they actually are.
How are FM signal generated?
There are several methods for generating FM signals but they all basically involve an oscillator with an electrically adjustable frequency. This type of oscillator uses an input voltage to affect the frequency of its output. For example, when the applied voltage increases, the oscillator output frequency increases and when the applied voltage decreases, the oscillator output frequency decreases as well. If no voltage is applied to the oscillator its output will be a signal at its centre frequency. The amount of frequency variations is deviated around the oscillators' centre frequency.
